Wyniki wyszukiwania - Biblioteka Nauki

1

The structure of shear bands in twinned fcc crystals and their influence on recrystallization nucleation

100%

Paul H. , Driver J. H.

|

tom Vol. 54, nr 2

209-220

EN

The orientations of recrystallization nuclei and their adjacent as-deformed regions have been characterised in deformed single crystals of different metals (Ag, Cu, Cu-2%wt.Al and Cu-8%wtAl) in which twinning and/or shear banding occur. {112 }<111> oriented crystals of these metals have been compressed to different strains, then lightly annealed, and the crystallographic aspects of the recrystallization process along shear bands examined by local orientation measurement in TEM and SEM. The results clearly show the existence of a well-defined crystallographic relation between the local deformation substructure and the first recrystallized areas of uniform orientation. The first-formed nuclei always exhibit near 25--40° (<111>-<112>) type misorientations, in the direction of highest growth, with respect to one of the two main groups of the deformation texture components. The rotation axes can be correlated with the slip plane normal of highest activity. As recrystallization proceeds, recrystallization twinning develops strongly and facilitates rapid growth; the first and higher generations of twins then tend to obscure the initial primary crystallographic relation between the shear bands and recrystallization nuclei.

2

Natural ageing effects on microstructure and properties of rail fastening elements SKL-12

51%

Labisz K. , Konieczny J.

|

tom z. 106

85--96

EN

Rail transport is presently one of the most supported means of transport in Europe; it existed from the end of the 18th century. However, some issues especially concerning materials and its exploitation are still actual and are a matter of scientific projects or developments. In this paper, analyses concerning the characterisation of used track infrastructure elements in form of sleepers of the popular rail fastening system SKL 12 were performed. Specifically, the main objective of the work was the characteristics of the material microstructure and properties after long-term usage and natural ageing, reaching over a few decades. In this paper was conducted investigations concerning the non-used and used fasteners by reason of classic material research methods. The analysis was carried out based on the results obtained through research using mainly light, scanning electron microscopy (SEM) and transmission electron microscopy (TEM), as well as electron diffraction for the lattice structure determination, EDS chemical microanalysis and Rockwell hardness testing were also carried out in terms of identification of the chemical analysis changes that occurred after long-term application. The main reason was to characterise the long-term usage for the microstructure changes on the surface layer of the used fasteners compared to newly produced material.

3

Kompleksowa charakterystyka strukturalna uporządkowanych faz międzymetalicznych

44%

Jezierska E.

|

2010

|

tom z. 26

3-194

PL

Badania strukturalne obejmowały kompleksową elektronomikroskopową analizę fazową ze szczególnym uwzględnieniem struktury domen antyfazowych i ich analizy krystalograficznej oraz sposobu rozmieszczenia cząstek i wydzieleń w strukturach wielofazowych. Charakterystyka strukturalna została przeprowadzona zarówno metodami konwencjonalnej mikroskopii i dyfrakcji elektronów, jak też metodami wielokrotnego ciemnego pola, wysokorozdzielczej mikroskopii elektronowej (HRTEM) w jasnym i ciemnym polu (DF HRTEM), krystalografii elektronowej, spektrometrii energodyspersyjnej (EDS) i dyfrakcji w zbieżnej wiązce elektronów przy dużych kątach zbieżności (LACBED). Przedmiotem badań były stopy na bazie uporządkowanych faz międzymetalicznych o różnych nadstrukturach Ni3Al, NiAl, FeAl, Fe3Al, Cu3Au, Al3Ti, Al3Zr. Na podstawie przeprowadzonych badań strukturalnych określono charakter zmian rozkładu wielkości domen antyfazowych oraz ich kształtu w zależności od typu uporządkowania, składu chemicznego i orientacji krystalograficznej. Określono czynniki sprzyjające nadplastyczności w stopach na bazie uporządkowanej fazy międzymetalicznej Fe3Al z uwzględnieniem poślizgu nadstrukturalnego. Uzyskano obrazy HRTEM martenzytu modulowanego, powstającego przez oscylacje płaszczyzn krystalograficznych oraz martenzytycznych struktur wielowarstwowych, typowych dla stopów z pamięcią kształtu, polegających na synchronicznych przesunięciach atomów. Na podstawie komplementarnych badań z różnych technik mikroskopowych określono strukturalne uwarunkowania występowania struktur modulowanych w uporządkowanych fazach międzymetalicznych w stopach Ni-Al, Ni-Al-Cr i Ni-Fe-Ti. Wprowadzono nowatorską koncepcję tensegralności strukturalnej do opisu przemian strukturalnych i samoorganizacji defektów struktury krystalicznej.

EN

Integrated structural characterization of ordered intermetallics and comparison of results for different phases and superstructures were performed by means of transmission electron microscopy. The antiphase domains structure in ordered intermetallics has been examined. Different techniques and methods were used in the study: conventional transmission electron microscopy TEM, electron diffraction, multiple dark field, large angle converged electron diffraction LACBED and high resolution transmission electron microscopy HRTEM. Experimental studies have been carried out in order to evaluate the effect of ordering phenomena for various phases: Ni3Al, NiAl, FeAl, Fe3Al, Cu3Au, Al3Ti, Al3Zr. Nanosized symmetry-related antiphase domains were observed in the studied Ni-Al and Fe-Al alloys after shock-wave deformation and detailed stereological investigation had been performed. Superplastic deformation in Fe3Al alloy was analyzed. Modulated martensite and layered structures were investigated using conventional TEM and HRTEM methods. The methodology of modulated structure recognition was proposed and its application to ordered intermetallics was presented. The concept of structural tensegrity was introduced to describe phase transformation and self-organization of complex defects in crystalline structures.

4

Identification of a phase sedimented in an Al-Fe-Mn-Si alloy.

38%

Gigla M. , Goryczka T. , Morawiec H. , Sukiennik M.

|

tom R. XIX, nr 4

905-908

EN

The formation, growth and sedimentation of intermetallic phase is one of the methods used to produce from scrap - commercial purity aluminium alloys. The formula of the sedimented phase was established basing on the chemical composition determined by the x-ray microprobe analysis of the sedimented particles. Until now the quarternary Al-Fe-Mn-Si equilibrium phase diagram is not known. The structure of this phase was studied using the X-ray powder diffraction technique and electron diffraction on thin foils using TEM. Both methods confirmed that the structure of the Al7(Fe,Mn)2Si phase has a cubic lattice with a parameter ao=12.56 A and 144 atoms per unit cell and belongs to the Im3 space group. The formation of this structure was confirmed in alloys with a chemical composition similar to the studied intemetallic phase.