Wyniki wyszukiwania - Biblioteka Nauki

Nowa wersja platformy, zawierająca wyłącznie zasoby pełnotekstowe, jest już dostępna.
Przejdź na https://bibliotekanauki.pl

Ograniczanie wyników

Znaleziono wyników: 2

Liczba wyników na stronie

Wyniki wyszukiwania

Wyszukiwano:
w słowach kluczowych: Ti-6Al-4V ELI alloy

Sortuj według:

Ogranicz wyniki do:

Microstructure and Mechanical Properties of Amorphous Hydrogenated DLC-Coated Ti-6Al-4V ELI Alloy with TiCN Interlayer Prepared by rf-PECVD

100%

Lee K. , Kang S.

2020

tom Vol. 65, iss. 4

1357--1360

The low adherence of diamond-like carbon (DLC) films on titanium (Ti) alloys can be improved by using interlayer coatings. In this study, DLC (a-C:H) films were deposited using radio-frequency plasma-enhanced chemical vapor deposition (rf-PECVD), and a TiCN interlayer was applied between the extra low interstitial (ELI) grade of Ti-6Al-4V alloy and a-C:H film. The characteristics of the a-C:H-coated Ti-6Al-4V ELI alloy were investigated using field emission scanning electron microscopy, Vickers hardness, and scratch and wear tests. The DLC (a-C:H) films deposited by rf-PECVD had a thickness of 1.7 μm, and the TiCN interlayer hada thickness of 1.1 μm. Vickers hardness of the DLC (a-C:H) films were increased as a result of the influence of the TiCN interlayer. The resulting friction coefficient of the a-C:H-coated Ti-6Al-4V with the TiCN interlayer had an extremely low value of 0.07.

Corrosion resistance characteristics of a Ti-6Al-4V ELI alloy fabricated by electron beam melting after the applied post-process treatment methods

51%

Szymczyk-Ziółkowska P. , Hoppe V. , Gąsiorek J. , Rusińska M. , Kęszycki D. , Szczepański Ł. , Dudek-Wicher R. , Detyna J.

2021

tom Vol. 41, no. 4

1575--1588

Post-process modifications in the form of Hot Isostatic Pressing or surface treatment methods such as sandblasting ormachining have been widely used in the case of improving the quality of elements manufactured with the use of EBM (Electron Beam Melting). The corrosion resistance of titanium alloys for medical applications is a key and critical aspect for the use of personalized components as implants, especially when investigating the issue of additive manufacturing. This paper presents the results of research on the influence of HIP processing on the functional properties of the material produced with the use of EBM, considering the aspect of reconstructive medicine. Both the influence of surface modification and the influence of post-process treatment on microstructural, mechanical, and corrosion properties were investigated. A wide range of research has been carried out using scanning and transmission electron microscopy methods, in combination with three-point static bending tests and performing corrosion tests using potentiodynamic polarization and electrochemical spectroscopic impedance (EIS) in Hank‘s solution. The results showed that HIP treatment has a positive effect on the corrosive properties of the material in terms of increased corrosion resistance compared to materials not subjected to this type of post-process treatment. This fact is also related to the change of the alloy microstructure and the change of mechanical properties towards increased plasticity. In the case of the production of personalized implants with the use of EBM, it is worth considering the benefits of the HIP.