Wyniki wyszukiwania - Biblioteka Nauki

Nowa wersja platformy, zawierająca wyłącznie zasoby pełnotekstowe, jest już dostępna.
Przejdź na https://bibliotekanauki.pl

Ograniczanie wyników

2 Advances in Science and Technology. Research Journal

Znaleziono wyników: 2

Liczba wyników na stronie

Wyniki wyszukiwania

Sortuj według:

Ogranicz wyniki do:

The Manufacturing of Composite Materials in the Matrix of Modified Phenol-Formaldehyde Resins

100%

Krasinskyi V. , Jachowicz T. , Dulebova L. , Gajdoš I. , Malinowski R.

2021

tom Vol. 15, no 4

267--272

The work develops the method of obtaining new composite materials based on novolac phenol-formaldehyde resin with improved adhesion properties and heat resistance. The composites were obtained by chemical modification of phenol-formaldehyde resin by epoxy resin and polyvinylpyrrolidone during the hardening of the composition. The mechanism of resins modification and hardening has been determined. It is shown that due to the modification, the heat resistance and adhesive strength of the obtained enamels and coatings have significantly increased. In particular, with the polyvinylpyrrolidone content from 0.5 to 1 wt% and epoxy resin from 25 to 50 wt%, the adhesive strength of the compositions increases 5-7 times.

Influence and optimization of the setting of input parameters of laser profilometry by the surface measurement manufactured by the AWJ technology

100%

Mitaľ G. , Gajdoš I. , Ružbarsky J. , Jachowicz T. , Majewski Ł.

tom Vol. 12, no 1

329--337

The publication deals with the measurement and evaluation of roughness parameters by means of laser profiling, and its main task is to determine the effect of selecting the internal gain adjustment (Gain mode) on measured roughness values of the surface treated by the water beam technology. The publication details the software, hardware, and other parts of the device designed to measure the roughness of different types of surfaces. It further describes the behavior of individual parts of the apparatus as a whole and methods of measuring the roughness of the surface along a defined profile section by means of the triangulation principle of laser profiling. The measured sample was cut by a thick (rough) cut at pressure of 380 MPa. As an abrasive, the Australian Grenade with the grain Mesh 50 was used.The experiment was carried out at the Faculty of Production Technologies in the Laboratory of Roughness Measurement at the Department of technical systems design and monitoring in Prešov. Measurement of surface roughness parameters was performed on an optical measuring system to control surface parameters and the contact roughness meter Mitutyo SJ400.