External sulfate attack is detected on concrete construction exposed to soils, groundwater, seawater, or wastewater, and leads to serious damage to concrete elements. This paper describes an investigation of acidic corrosion caused by artificial sulphuric acid and biogenic sulphuric acid. The concrete prisms prepared from concrete-containing sulfate-resisting cement were exposed to an acid environment of different origin over a period of 3 months. The concentration of basic chemical elements such as calcium, silicon, iron, and aluminium were measured in liquid phases. Correlation analysis was used to evaluate dependencies and trends of leached-out amounts in these concentrations. Based on correlation coefficient, the intensity of dependency of the leaching trend was determined. A higher aggressiveness of sulfuric acid produced by sulfur-oxidizing bacteria was confirmed in terms of main concrete components’ leaching.
2
Dostęp do pełnego tekstu na zewnętrznej witrynie WWW
Attack of external water to concrete results in the degradation of cement and changes the concrete pore water and solid phase composition. The leaching behaviour of cement-based products have been shown to be similar after assessing the leaching characteristics by means of a pH dependence leaching test. The paper is focused on the investigation of the leachability of the concrete samples of different composition due to distilled water and its relation to pH. Si, Ca, Al, Fe and Mn ions leached out from the cement matrix were measured after each of fives experimental cycles. Three sets of samples were studied: without fly ash, and containing coal fly as cement replacement (5 wt. % and 10% wt. respectively). Statistical methods were used for the intensity and course of deterioration assessment regarding a dependency of Si/pH, Ca/pH Al/pH and Fe/pH and Mn/pH for each type of samples. The correlation among leaching processes according to type of concrete were also statistically studied.
PL
Woda wywiera negatywny wpływ biorąc udział w procesie degradacji cementu oraz zmienia wodę porową betonu, jak i skład fazy stałej. Wymywanie produktów cementowych wykazało podobne właściwości otrzymane za pomocą testów ługowania z uwzględnieniem pH. W pracy skoncentrowano się na badaniach odcieku z próbek betonu o różnym pH oraz jonów Si, Ca, Al, Fe i Mn wypłukanych z matrycy cementowej, które były wyznaczane po każdym z pięciu cykli eksperymentalnych. Badaniu poddano trzy zestawy próbek bez zawartości popiołu lotnego i zawierającego popiół lotny jako zamiennik cementu (odpowiednio 5% wag. do 10% wag.,). Metody statystyczne były wykorzystywane do oceny intensywności oraz czasu uszkodzeń w zależności od Si/pH, Ca/pH Al/pH i Fe/pH oraz Mn/pH dla poszczególnych próbek. W pracy została również przedstawiona korelacja pomiędzy procesami wymywania w zależności od rodzaju betonu.
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.