Wyniki wyszukiwania - Biblioteka Nauki

Ten serwis zostanie wyłączony 2025-02-11.

Nowa wersja platformy, zawierająca wyłącznie zasoby pełnotekstowe, jest już dostępna.
Przejdź na https://bibliotekanauki.pl

Ograniczanie wyników

2 Acta Physica Polonica A

Znaleziono wyników: 2

Liczba wyników na stronie

Wyniki wyszukiwania

Sortuj według:

Ogranicz wyniki do:

Modification of Microstructure and Properties of Extruded Mg-Li-Al Alloys of α and α+ β Phase Composition using ECAP Processing

100%

Dutkiewicz J. , Rusz S. , Maziarz W. , Skuza W. , Kuc D. , Hilser O.

Acta Physica Polonica A

2017

tom 131

nr 5

1303-1306

Two magnesium based alloys containing 4.5 wt% Li and 1.5 wt% Al (alloy 1) and 9 wt% Li and 1.5 wt% Al (alloy 2) were cast under argon atmosphere and hot extruded at 350°C. Microstructure of alloy 1 consisted of hexagonal α phase of average grain size 20 μm and small aluminum rich precipitates being the most probably AlLi₂Mg phase. Alloy 2 in the extruded form consisted of lamellas of α+ β phases of thickness 5-20 μm and length above 100 μm. Significant grain refinement down to about 2 μ m was observed in one-phase hexagonal (hcp) alloy 1 after one pass of ECAP processing with helical component. Two-phase (hcp + bcc) alloy 2 showed higher non-homogeneity after the first equal channel angular pressing pass due to easier deformation of softer bcc phase, while both, α and β phases exhibited low angle grain boundaries. The hardness and the yield strength of the alloys were higher for alloy 1 (68 HV and 205 MPa, respectively) than those of alloy 2 (61 HV and 175 MPa). Subsequent equal channel angular pressing passes were performed at lower extrusion stress. The hardness of both alloys did not change significantly after subsequent equal channel angular pressing passes and revealed tendency to decrease. Two-phase alloy showed superplastic properties already after one equal channel angular pressing pass at 160°C with grain growth after superplastic tensile testing. Single phase hcp alloy did not show such properties after 1 pass, but after a few equal channel angular pressing passes it could be superplastically formed.

Influence of Fe Addition on the Martensitic Transformation, Structure and Magnetic Properties of Metamagnetic Ni-Co-Mn-Sn Alloys

100%

Wójcik A. , Maziarz W. , Szczerba M. , Sikora M. , Hawełek Ł. , Czaja P.

nr 4

1026-1028

In this study the effect of Fe for Ni substitution in Ni₄₄Co₆Mn₃₉Sn₁₁ metamagnetic shape memory alloys on their structure, magneto-structural transformation characteristics, magnetic and magnetocaloric properties was studied. The results show that the structure and martensite transformation behavior strongly depends on the Fe concentration. The martensitic transformation temperature decreases with 1 at.% of Fe and is suppressed with higher Fe content. It was further found that substitution of Fe for Ni leads to lowering of the value of magnetic entropy change.