Wyniki wyszukiwania - Biblioteka Nauki

Ten serwis zostanie wyłączony 2025-02-11.

Nowa wersja platformy, zawierająca wyłącznie zasoby pełnotekstowe, jest już dostępna.
Przejdź na https://bibliotekanauki.pl

Ograniczanie wyników

Znaleziono wyników: 2

Liczba wyników na stronie

Wyniki wyszukiwania

Sortuj według:

Ogranicz wyniki do:

Recovery of metals from printed circuit boards by means of electrostatic separation

100%

Franke D. , Suponik T. , Nuckowski P. M. , Gołombek K. , Hyra K.

Management Systems in Production Engineering

2020

tom nr 4 (28)

213--219

Without the use of appropriate recycling technologies, the growing amount of electronic waste in the world can be a threat to the development of new technologies, and in the case of improper waste management, may have a negative impact on the environment. This is due to the fact that this waste contains large amounts of valuable metals and toxic polymers. Therefore, it should be recycled in accordance with the assumptions of the circular economy. The methods of mechanical recovery of metals from electronic waste, including printed circuits, may be widely used in the future by waste management companies as well as metal production and processing companies. That is why, a well-known and easily applicable electrostatic separation (ES) method was used to recover metals from printed circuit boards. The grain class of 0.32 - 0.10 mm, obtained after grinding the boards, was fed to a separator. Feed and separation products were analyzed by means of ICP-AES, SEM/EDS and XRD. The concentrate yield obtained after electrostatic separation amounted to 32.3% of the feed. Its density was 11.1 g/cc. Out of the 91.44% elements identified in the concentrate, over 90% were metals. XRD, SEM observations and EDS analysis confirmed the presence of non-metallic materials in the concentrate. This relatively high content of impurities indicates the need to grind printed circuit board into grain classes smaller than 0.32-0.10 mm.

The impact of precipitation on state of the slopes surface and thermal activity of the mine waste dump - preliminary study

86%

Różański Z. , Wrona P. , Pach G. , Niewiadomski A. , Suponik T. , Frączek R. , Balcarczyk L.

Journal of Sustainable Mining

2021

tom Vol. 20, iss. 1

2--12

Precipitation, especially with a high intensity, affects the condition of mining waste dumps. The article presents the results of research aimed at determining the impact of rain on water erosion on the slopes of a coal waste dump and its thermal state. Preliminary tests of the condition of two slopes of the coal waste dump in Libiąż (Poland) undertaken in the frameworks of the TEXMIN project was carried out using modern geodesy techniques (low-ceiling photogrammetry and TLS terrestrial laser scanning). The current geometry of the slope surface was faithfully reproduced in the form of a cloud of points with known coordinates x, y, z. The thermal state within the analyzed slopes of the dump was also assessed. Based on thermography studies and measurements of temperature and gas concentrations inside the object, two zones of thermal activity were located on one of the examined slopes. The test results constitute the initial state against which the results of further tests will be compared. This will allow to determine the influence of precipitation on the amount of water erosion and the thermal state of the dump in a specific time period.