Wyniki wyszukiwania - Biblioteka Nauki

1

Determination of the optimum percentage of high strength bars in RC beams with combined reinforcement using FEM

100%

Selejdak J. , Blikharskyy Y. , Bobalo T. , Kopiika N.

System Safety : Human - Technical Facility - Environment

|

2020

|

tom Vol. 2, nr 1

230--236

EN

In this work on the basis of the developed and tested mathematical model, the numerical experiment is conducted in order to study in more detail the specifics of performance of concrete beams` with combined reinforcement. For this purpose nine series of reinforced concrete beams with different combination of steel bars (A400C, At800, A1000) and ribbon reinforcement (C275) were modeled. In the developed series two classes of concrete were used: C50/60, C35/45. The functions derived on the basis of mathematical modeling allow us to determine the recommended percentage of high-strength reinforcement of common reinforced concrete structures with single reinforcement. Therefore, the possibility is obtained to reduce the total structures` reinforcement percentage, increasing their deformability by the specified value without affecting the bearing capacity.

2

Mathematical modelling of stress-strain state of steel-concrete beams with combined reinforcemenent

100%

Selejdak J. , Bobalo T. , Blikharskyy Y. , Dankevych I.

Production Engineering Archives

|

2023

|

tom Vol. 29, Iss. 1

108--115

EN

Most of the modern computer software for the building structures` calculation is based on mathematical dependencies which make it possible to analyse rather complex stress-strain state of structures subjected to loading. As a rule, the calculation is based on the finite element method and is reduced to the calculation of deformations arising in structures due to the action of external forces with the use of real strain diagrams of materials, σ-ε diagrams for concrete and reinforcement. Modern normative regulations for reinforced concrete structures` calculation are also based on the deformation model using material deformation diagrams, which are as close to the real ones, as possible. Therefore, this study was aimed to investigate in more detail the stress-strain state and the physical essence of the processes occurring in reinforced concrete structures with combined reinforcement according to mathematical approaches and regulations of DBN B.2.6-98:2009 and DSTU B. In 2.6-156:2010. Namely, in the research is analysed the combined reinforcement of S245 steel tapes and A1000 rebar, which is used in the production of reinforced concrete elements. The results of mathematical modelling were compared with the calculation results, according to DBN B.2.6-98: 2009 and DSTU B. B 2.6-156:2010, as well as with field experimental data. Therefore, the conclusion could be made, whether it is possible to use this technique with sufficient accuracy to calculate reinforced concrete structures with combined reinforcement.

3

Computer modelling of RC beams reinforced with high strength rebars and steel plate

100%

Bobalo T. , Blikharskyy Y. , Krainskyi P. , Volynets M.

Quality Production Improvement - QPI

|

2019

|

tom Vol. 1, Iss. 1

304--310

EN

The use of computers provides the opportunity to analyse and design complex structures, taking into account the geometric and physical nonlinearity of construction materials. In the article the study of stress-strain state of mixed steelconcrete beams, were presented. The results of this study showed that the method of calculation according to designe codes gave satisfactorily results of calculated strength compared with experiments. However, these methodes do not provide complete information of structural performance at all levels of load. For a more complete study of the stress-strain state and the physical nature of the processes occurring in steel-concrete structures reinforced with a mixed reinforcement, the calculation method using "Lira" software complex is proposed. The method of calculation is based on the finite element method. The calculation is made taking into account physical nonlinearity and real diagrams of σ-ε of materials using the nonlinear deformation law №14 of "Lira" software complex. The proposed method of calculation allows to determine the values of bearing capacity, the development of deformations and the beginning of crack formation, as well as stresses at all load levels.

4

Influence of the percentage of reinforcement by un-stressed rebar on the deformability of pre-stressed RC beams

88%

Blikharskyy Y. , Selejdak J. , Bobalo T. , Khmil R. , Volynets M.

Production Engineering Archives

|

2021

|

tom Vol. 27, Iss. 3

212--216

EN

This article presents the materials of deformability studies of pre-stressed steel-concrete beams reinforced with a package of reinforcement with different ratio of tape and rebar in the pure bending moment zone. The aim of the research was determination of the reinforcement percentage influence, for pre-stressed reinforced concrete beams reinforced with a package of reinforcement on their deformability. Also, the aim was to evaluate the effectiveness of using pre-stressed rebar in combined reinforcement. The practical significance of the experimental research is to study the deformability in pre-stressed bending elements with external tape and rebar reinforcement, taking into account the influence of different ratios of reinforcement areas within the combined reinforcement and development of proposals for such structures` calculation and design. The scientific novelty of the research is in obtaining the deformability characteristics of reinforced concrete beams reinforced with a package of reinforcement (tape and steel bars with periodic profile) with different ratios in the case of static loads` action.