Technology development of magnesium-based bulk amorphous alloys

• Autorzy: Babilas, R. , Lebuda, A. , Cesarz-Andraczke, K. , Sakiewicz, P. , Nowosielski, R.
• Języki publikacji: EN

Abstrakty

EN

The paper presents some methods for producing bulk metallic glasses. The study was performed on ternary Mg-based alloys. The Mg65Cu25Y10 glassy alloy was prepared in the form of rods by pressure die casting method of molten alloy into water cooled copper mold. The X-ray diffraction investigations revealed that the examined samples obtained in the bulk form were amorphous.

Słowa kluczowe

PL

stop amorficzny; stop magnezu; dyfrakcja rentgenowska

EN

amorphous alloy; magnesium alloy; X-ray diffraction

• Czasopismo: Selected Engineering Problems
• Rocznik: 2013
• Tom: nr 4
• Strony: 9--12
• Opis fizyczny: Bibliogr. 8 poz.

Twórcy

autor

Babilas, R.

• Institute of Engineering Materials and Biomaterials, Faculty of Mechanical Engineering, Silesian University of Technology, Gliwice, Poland

autor

Lebuda, A.

• Institute of Engineering Materials and Biomaterials, Faculty of Mechanical Engineering, Silesian University of Technology, Gliwice, Poland,

autor

Cesarz-Andraczke, K.

• Institute of Engineering Materials and Biomaterials, Faculty of Mechanical Engineering, Silesian University of Technology, Gliwice, Poland

autor

Sakiewicz, P.

• Institute of Engineering Materials and Biomaterials, Faculty of Mechanical Engineering, Silesian University of Technology, Gliwice, Poland

autor

Nowosielski, R.

• Institute of Engineering Materials and Biomaterials, Faculty of Mechanical Engineering, Silesian University of Technology, Gliwice, Poland

Bibliografia

• 1. Ma H., Zhang Q., Xu, J., Li Y., Ma E.: Doubling the critical size for bulk metallic glass formation in the Mg-Cu-Y ternary system, “Journal of Materials Research”, 2005, Vol. 20, pp. 2252-2255.
• 2. Babilas R., Cesarz K., Nowosielski R., Structure and properties of Mg-Cu-(Y,Ca), bulk metallic glasses XLI School of Materials Engineering, Cracow 2013, pp. 491-496 (in Polish).
• 3. Park E.S, Kim D.H.: Formation of Mg-Cu-Ni-Ag-Zn-Y-Gd bulk glassy alloy by casting into cone-shaped copper mold in air atmosphere, “Journal of Materials Research”, 2005, Vol. 20, pp. 1465-1469.
• 4. Suryanarayana C., Inoue A., Bulk metallic glasses, Boca Raton, CRC Press, 2011.
• 5. Ziewiec K., Metallic glasses obtained from the homogeneous liquid phase and in the field of liquid immiscibility, Scientific Publishing UP, Cracow, 2011 (in Polish).
• 6. Inoue A., Nakamura T., Sugita T., Zhang T., Masumoto T., Amorphous alloys with high tensile strength produced by a high pressure die casting method, “JIM”, 1993, Vol. 34, pp. 351-358.
• 7. Nowosielski R., Babilas R., Guwer A., Gawlas-Mucha A., Borowski A., Fabrication of Mg65Cu25Y10 bulk metallic glasses, “Archives of Materials Science and Engineering” 2012, vol. 53 (2), pp. 77-84.
• 8. Babilas R., Zajączkowski A., Głuchowski W., Nowosielski R., Preparation and glassforming ability of Mg-based bulk amorphous alloys, “Archives of Materials Science and Engineering” 2013, vol. 62 (2), pp. 78-86