Structural and electrochemical investigation of waste newspaper based electrodes for supercapacitor applications

• Autorzy: Adinaveen, T. , Vijaya, J. J. , Sivakumar, R. , Kennedy, L. J.
• Języki publikacji: EN

Abstrakty

EN

There is a general consensus to develop renewable energy storage and conversion technologies to replace fossil fuel energy for sustainable development. Currently, the development of high performance energy storage and conversion devices is an important step on the road to alternative energy technologies. With a special focus on the upgradation of waste to valuable energy, this paper presents an effective synthetic method that utilizes waste newspapers as the precursor to prepare the activated carbon electrodes by the pyrolysis and chemical activation processes. The amorphous nature and surface morphology of the carbon samples were confirmed by XRD and SEM analysis, respectively. Activated waste newspaper carbon (AWNP) showed good electrochemical properties at 800 °C and its specific capacitance at a scan rate of 2 mV/s was found to be 380 F/g. It is important to mention that the source of the raw material is cost effective and suitable for green technology.

Słowa kluczowe

EN

waste newspaper; electrode; hierarchical porous carbon; supercapacitor

• Czasopismo: Materials Science Poland
• Rocznik: 2016
• Tom: Vol. 34, No. 2
• Strony: 302--314
• Opis fizyczny: Bibliogr. 36 poz., rys., tab.

Twórcy

autor

Adinaveen, T.

• Catalysis and Nanomaterials Research Laboratory, Department of Chemistry, Loyola College, Chennai 600 034, India,

autor

Vijaya, J. J.

• Catalysis and Nanomaterials Research Laboratory, Department of Chemistry, Loyola College, Chennai 600 034, India

autor

Sivakumar, R.

• Catalysis and Nanomaterials Research Laboratory, Department of Chemistry, Loyola College, Chennai 600 034, India

autor

Kennedy, L. J.

• Materials Division, School of Advanced Sciences, Vellore Institute of Technology (VIT) University, Chennai Campus, Chennai 600 127, India

Bibliografia

• [1] Chen X., Li C., Gratzel M., Kostecki R., Mao S.S., Chem. Soc. Rev., 41 (2012), 7909.
• [2] Sanada Y., Suzuki M., Fujimoto K., Activated Carbon: Its fundamentals and applications, Kodan-sha, Tokyo, 1975.
• [3] Przybysz K., Paper technology, Part 2, WSiP, Warszawa, 1997.
• [4] Biedermann M., Grob K., Eur. Food. Res. Technol., 230 (2010), 785.
• [5] Shin H J., Kim C.J., KIM S.B., Biotechnol. Bioprocess. Eng., 14 (2009), 349.
• [6] Japan Paper Manufacturing Federation, Paper and Pulp (in Japanese), 564 (2014), 13.
• [7] Murphy R.J., Silkebakkan D., Chatchupong T., Florida centre of solid and hazardous waste management, University of Florida, Florida, 1990.
• [8] Wyman C.E., Dale B.E., Elander R.T., Bioresour. Technol., 96 (2005), 1959.
• [9] Lu W., Hartman R., Qu R.L., J. Phys. Chem. Lett., 2 (2011), 655.
• [10] Dekker M., Cooney D O., Activated Charcoal: Antidotal and other medical uses, New York, 1980.
• [11] Baker F.S., Miller C.E., Repik A.J., Encyclopedia of chemical technology, John Wiley and Sons, New York, 1992.
• [12] Kalpana D., Cho S.H., LEE S.B., J. Power Sources, 190 (2009), 587.
• [13] Rodriguez-Reinoso F., Pastor A.C., Marsh H., Carbon, 38 (2000), 379.
• [14] Wang T.H., Tan S.X., Liang C.H., Carbon, 47 (2009), 1867.
• [15] Paraknowitsch J.P., Zhang J., Su D., Thomas A., Antonietti M., Adv. Mater., 22 (2010), 87.
• [16] Inagaki M., New Carbon Mater., 24 (2009), 193.
• [17] Zhang G. Q., Zhang S.T., J. Solid State Electrochem., 13 (2009), 887.
• [18] Viswanathan B., Neel P.I., Varadarajan T.K., Methods of Activation and Specific Applications of Carbon Materials, National Centre for Catalysis Research, Indian Institute of Technology Madras, Chennai, 2009.
• [19] Bazarnova N.G., Karpova E.V., Katrakov I.B., Methods of Study of Wood and its Derivatives, Altai State University, Barnaul, 2002.
• [20] Mironov V.A., Yankovskii S.A., Spectroscopy in organic chemistry, Khimiya, Moscow, 1985.
• [21] Adinaveen T., Kennedy L.J., Vijaya J.J., J. Indian Eng. Chem., 19 (2013), 1470.
• [22] Senthilkumar S.T., Senthilkumar B., Balaji S., Mater. Res. Bull., 46 (2011), 413.
• [23] Fang B Z., Kim J.H., KIM M.S., Acc. Chem. Res., 46 (2013), 1397.
• [24] Subramanian V., Luo C., Stephan A.M., J. Phys. Chem. C, 111 (2000), 7527.
• [25] LIU X., LIU W., Zhang Z., Mater. Lett., 116 (2014), 304.
• [26] Zhang P., Cui X., CHEN J., LIU J., Solid State Electrochem., 6 (2013), 1749.
• [27] Yamada H., Nakamura H., Nakahara F., MORIGUCHI I., KUDO T., J. Phys. Chem. C, 111 (2007), 227.
• [28] Mrozowski S., Studies of carbon powders under compression, in: Proceedings 3rd Carbon Conference in Buffalo, Pergamon Press, 1959, p. 495.
• [29] HOLM R., Electrical Contacts, Almquist and Wiksells, Stockholm, 1946, p. 214.
• [30] Holm R., Electric Contacts: Theory and Application, Reprint of the 4th completely rewritten ed., Springer Verlag, Berlin/Heidelberg, 1967, p. 135.
• [31] Kinoshita K., Carbon: Electrochemical and Physicochemical Properties, New York, John Wiley and Sons Ltd., 1988.
• [32] Pantea D., Darmstadt H., Kaliaguine S., Carbon, 39 (2001), 1147.
• [33] Donnet J.B., Voet A., Carbon Black: Physics, Chemistry, and Elastomer Reinforcement, Marcel Dekker, New York, 1976.
• [34] Putun A.E., Ozbay N., Onal E.P., PUTUN E., Fuel. Process. Technol., 86 (2005), 1207.
• [35] Wigman I., Carbon, 27 (1989), 13.
• [36] Zakhidov A.A., Suh D.S., Kuznetsov A.A., Barisci J.N., Munoz e., Dalton A.B., Collins S., Ebron V.H., Zhang M., Ferraris J.P., Zakhidov A.A., Baughman R.H., Adv. Funct. Mater., 19 (2009), 2266.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.

Identyfikatory

DOI

10.1515/msp-2016-0064