Numerical validation of drilling of Al6061-T6 with experimental data

• Autorzy: Elango, Prashant , Marimuthu, K. Prakash
• Języki publikacji: EN

Abstrakty

EN

Drilling is a cutting process that uses a drill bit to cut a circular profile in workpiece. Forces acting on the drill bit reduce its life expectance. Analysis of forces acting on the drill bit during drilling prevents the tool from failing prematurely because of wear and excess feed rate. Excess feed rate can induce excessive internal stress on both the tool and workpiece. This paper aims to study the effects of reaction force acting on a drill bit during drilling of Al6061-T6. A numerical finite element simulation study is performed with commercially available software called Abaqus. Simulation results depend on the right choice of material property such as Johnson-Cook material property and Johnson-Cook damage property. Validation of material property is achieved by comparison of experimental results with simulative results. Reaction force acting against the drill bit during drilling is compared.

Słowa kluczowe

PL

Abaqus; element skończony; modelowanie numeryczne; siła reakcji; Johnson-Cook

EN

Abaqus; finite element; numerical simulation; reaction forces; Johnson-Cook

• Czasopismo: Mechanics and Mechanical Engineering
• Rocznik: 2019
• Tom: Vol. 23, nr 1
• Strony: 287--290
• Opis fizyczny: Bibliogr. 7 poz., il. kolor., wykr.

Twórcy

autor

Elango, Prashant

• Department of Mechanical Engineering, Amrita School of Engineering Amrita Vishwa Vidyapeetham, Coimbatore, Tamilnadu, India

autor

Marimuthu, K. Prakash

• Department of Mechanical Engineering, Amrita School of Engineering Amrita Vishwa Vidyapeetham, Coimbatore, Tamilnadu, India,

Bibliografia

• [1] Boldyrev, L.S., Shchurov, L.A., Nikonov, A.V.: Numerical Simulation of the Aluminum 6061-T6 Cutting and the Effect of the Constitutive Material Model and Failure Criteria on Cutting Forces’ Prediction, Procedia Engineering, 150, 866-870, 2016.
• [2] Isbilir, O., Ghassemieh, E.: Finite Element Analysis of Drilling of Titanium Alloy, Procedia Engineering, 10, 1877-1882, 2011.
• [3] Kumar, K.P., Kishore, P., Laxminarayana, P.: Prediction of Thrust Force and Torque in Drilling on Aluminum 6061-T6 Alloy, International Journal of Engineering Research & Technology, 2(3), 2013.
• [4] Prakash Marimuthu K., Prasada, H.P., Kumar C.S.: 3D Finite Element Model To Predict Machining Induced Residual Stresses Using Arbitrary Lagrangian Eulerian Approach, Journal of Engineering Science and Technology, 13(2), 2018.
• [5] Krishnakumar, K.P., Prakash Marimuthu, P., Rameshkumar, K. and Ramachandran, K.I.: Finite Element Simulation of Effect of Residual Stresses During Orthogonal Machining Using Ale Approach, Int. J. Machining And Machinability of Materials, 14(3), 2013.
• [6] Prakash Marimuthu P.K., Thirtha Prasada, H.P., Kumar, C.S.: Force, Stress Prediction In Drilling Of AISI 1045 Steel Using Finite Element Modelling, IOP Conf. Series: Materials Science and Engineering, 225, 012030, 2017.
• [7] Prakash Marimuthu, P.K., Chethan Kumar C S, Thirtha Prasada, H.P.: Mathematical Modelling To Predict The Residual Stresses Induced In Milling Process, International Journal of Mechanical and Production Engineering Research and Development, 8(1), 423-428, 2018.

Identyfikatory

DOI

10.2478/mme-2019-0038