Computer aided modal analysis of a vibrating system with piezoelectric composite transducer

• Autorzy: Płaczek, M.
• Języki publikacji: EN

Abstrakty

EN

Paper presents a computer aided simulation of one-dimensional vibrating system with piezoelectric transducer used as vibration actuators. The algorithm of modelling and analysis of such kind of systems was presented in details in other author’s works [2,3]. Here results obtained using computer aided methods are presented. The work is an introduction to comparison of results obtained analytical methods and computer simulations. The considered system with MFC transducer used as vibration actuator was modelled using a NX 8.0 software.

Słowa kluczowe

PL

kompozytowy przetwornik piezoelektryczny; układ drgający; analiza modalna; modelowanie matematyczne; CAM

EN

composite piezoelectric transducer; vibrating system; modal analysis; mathematical modeling; CAM

• Czasopismo: Selected Engineering Problems
• Rocznik: 2013
• Tom: nr 4
• Strony: 143--146
• Opis fizyczny: Bibliogr. 5 poz.

Twórcy

autor

Płaczek, M.

• Institute of Engineering Processes Automation and Integrated Manufacturing Systems, Faculty of Mechanical Engineering, Silesian University of Technology, Gliwice, Poland,

Bibliografia

• 10. Białas K.: Synthesis of mechanical systems including passive or active elements reducing of vibrations. J. of Achievements in Materials and Manufacturing Engineering, Vol. 20, Issue 1-2, Gliwice (2007) pp.323-326.
• 11. Buchacz A., Płaczek M.: Modelling and testing of one-dimensional vibrating mechatronic systems, Silesian University of Technology Publishing House, Gliwice, 2011 (in Polish).
• 12. Buchacz A., Płaczek M., The analysis of a composite beam with piezoelectric actuator based on the approximate method, J. of Vibroengineering, 14/1 (2012), 111.
• 13.Wróbel A.: Kelvin Voigt’s model of single piezoelectric plate, Journal of Vibroengineering, Vol. 14, Issue 2, 2012, pp. 534-537, ISSN 1392-8716.
• 14. http://www.smart-material.com/MFC-product-main.html (Access 04.11.2013).

Uwagi

Błędna numeracja bibliografii.