Influence of parameters of deposition on forming carbon films onto cemented carbide surface in RF PCVD method

• Autorzy: Grabarczyk, J. , Couvrat, P. , Mitura, S. , Niedzielski, P. , Kaczorowski, W.
• Konferencja: International Student Symposium on Mechanics, Microtechnology and Microcomputers "STUSYM`2000" (XIII ; Łódź, Polska)
• Języki publikacji: EN

Abstrakty

EN

Examination described in this article was made in Laboratorie de Materiaux in ECAM (L'Ecole Catholique d'Arts et Metiers), Lyon. It was preceded by investigation concerning overing of cemented carbide cutting tools by wear resistant carbon films examined in technical University in Lodz. The works concerned three types of cutting tools: slitting saws, ang-type cutters and cutter head plates. In all cases the increase of tools life was from 50 to 00 percent depending on types of tools and parameters of deposition. All milling tests were arried out in real work conditions in wood industry. In details information about properties f carbon film, NCD (nanokrystalline diamond) and DLC (diamond-like carbon) sintered in RF PCVD method and wear behavior cutting tools with and without carbon layer was escribed in works wrote by Mitura, Niedzielski and others [1,2,3]. The aim of this project was to examine influence parameters of deposition and method of location of samples on RF-power electrode in RF PCVD method on structure of carbon coatings, which covered cemented carbide substrates. During researches Scanning Electron Microscope (SEM) type PHILIPS XL30i was used, with installed microanalysis system (EDX) from EDAX.

Słowa kluczowe

EN

RF PCVD method; nanocrystalline diamond; carbon films; diamond-like carbon; scanning electron microscope; SEM

• Czasopismo: Mechanics and Mechanical Engineering
• Rocznik: 2000
• Tom: Vol. 4, nr 1
• Strony: 51--56
• Opis fizyczny: Bibliogr. 6 poz.

Twórcy

autor

Grabarczyk, J.

• Technical University of Lodz Faculty of Mechanical Engineering Division of Thin Films ul. Stefanowskiego 1, 90- 924 Lodz Tel. [phone],

autor

Couvrat, P.

• ECAM, Laboratorie do Materiaux 40 Montee st Barthelemy, 69321 Lyon Cedex 05 Tel. [phone], ,

autor

Mitura, S.

• Technical University of Lodz Faculty of Mechanical Engineering Division of Thin Films ul. Stefanowskiego 1, 90- 924 Lodz Tel. [phone]

autor

Niedzielski, P.

• Technical University of Lodz Faculty of Mechanical Engineering Division of Thin Films ul. Stefanowskiego 1, 90- 924 Lodz Tel. [phone]

autor

Kaczorowski, W.

• Technical University of Lodz Faculty of Mechanical Engineering Division of Thin Films ul. Stefanowskiego 1, 90- 924 Lodz Tel. [phone]