Research of the cutting possibility of magnesium alloys with abrasive diamond wire saw

• Autorzy: Wiśniewska, M.
• Języki publikacji: EN

Abstrakty

EN

Wire saw technology is a method that works great in industrial applications - it is a dominant method in the production of silicon wafers. But almost all kinds of brittle materials (ceramics, rocks, meteorite and minerals or wood) can be cut using wire saw. Question, this article will try to answer is whether this is also applicable to magnesion alloys? Article presents selected problems from an area of abrasive treatment of magnesium alloys. This includes effects of research, concerning possibilities of application of abrasive diamond wire in the process of cutting magnesium alloys AM60 and AZ91 as well as results concerning surface quality obtained after cutting with the abrasive diamond wire German Company HK Präzisionstechnik.

Słowa kluczowe

PL

struna diamentowa; przecinarki strunowe; stopy magnezu

EN

diamond wire; wire saw; magnesium alloys

• Czasopismo: Mechanics and Mechanical Engineering
• Rocznik: 2018
• Tom: Vol. 22, nr 4
• Strony: 1301--1308
• Opis fizyczny: Bibliogr. 15 poz., fot. kolor., wykr.

Twórcy

autor

Wiśniewska, M.

• Faculty of Mechanical Engineering, Wroclaw University of Science and Technology,

Bibliografia

• [1] Chao, W.: Fundamental investigations of cutting of silicon for photovoltaics applications, The George W. Woodruff School of Mechanical Engineering Georgia Institute of Technology, 2012.
• [2] Hardin, C. W.: Fixed Abrasive Diamond Wire Saw Slicing of Single-Crystal Silicon Carbide Wafers, Materials and manufacturing processes, 19, 2, 2004.
• [3] Teomete, E.: Effects of process parameters on surface quality for wire saw cutting of alumina ceramic, Gazi University Journal of Science, 24, 2, 291-297, 2011.
• [4] Mengjun, Z.: Experimental study on slicing of sapphire with fixed abrasive diamond wire saw, World Academy of Science, Engineering and Technology International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 9, 5, 2015.
• [5] http://www.kerfindustries.com/ (access March 2017).
• [6] http://keandiamondwire.com/other%20industries, (access March 2017).
• [7] Ciałkowska, B.: Cutting hard-machinable materials with an abrasive wire/ Cięcie struną zbrojoną materiałów trudnoobrabialnych, Oficyna Wydawnicza Politechniki Wrocławskiej, Wrocław, 2008.
• [8] Wiśniewska, M.: Cutting hard - machinable materials with different constructed abrasive wires and methodology of evaluation their functional properties, PhD thesis, Wrocław, 2015.
• [9] Buldum B., Sik, A., Ozkul, I.: Investigation of magnesium alloys machinability, International Journal of Electronics; Mechanical and Mechatronics Engineering, 2, 261-268, 2012.
• [10] Magnesium Elektron - Service and Innovation in Magnesium https://www.magnesium-elektron.com/, (access March 2017).
• [11] https://manufacturability.wordpress.com/2013/02/06/non-ferrous-alloys/ (access March 2017).
• [12] http://metalpedia.asianmetal.com/metal/magnesium/application.shtml (access March 2017).
• [13] Monteiro, W. A.: Light metal alloys applications, Materials Science, Metals and Nonmetals, June 11, 2014.
• [14] http://mg.tripod.com/asm prop.htm#amchem (access March 2017).
• [15] http://www.hk-prt.de/index.php?id=35 (access March 2017).

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).