Effect of pH and annealing temperature on the structural and magnetic properties of cerium-substituted yttrium iron garnet powders produced by the sol-gel method

• Autorzy: Yarici, I. , Erol, M. , Celik, E. , Ozturk, Y.
• Języki publikacji: EN

Abstrakty

EN

Cerium substituted yttrium iron garnet (Ce_0.2Y _2.8Fe₅O₁₂; Ce-YIG) nanoparticles were produced via the sol-gel method from solutions of Ce-, Y- and Fe-based precursors, a solvent and a chelating agent. The solutions were dried at 200ºC and heat treated at temperatures between 800 ºC and 1400ºC for 3 h in air. The effects of pH and annealing temperature on the structure, phase formation, magnetic properties and crystallite size were investigated. A cubic YIG phase was obtained for the sample annealed at 1400 ºC. The presented results showed that the pH value of the starting solution affects the crystal size and consequently, the saturation magnetization.

Słowa kluczowe

EN

sol-gel processes; Ce-YIG; nanoparticles

• Czasopismo: Materials Science Poland
• Rocznik: 2016
• Tom: Vol. 34, No. 2
• Strony: 362--367
• Opis fizyczny: Bibliogr. 43 poz., rys.

Twórcy

autor

Yarici, I.

• Department of Electrical and Electronics Engineering, Ege University, 35100, İzmir, Turkey,

autor

Erol, M.

• Department of Materials Science and Engineering, Izmir K.atip Celebi University, 35620, İzmir, Turkey

autor

Celik, E.

• Department of Metallurgical and Materials Engineering, Dokuz Eylul University, 35160, İzmir, Turkey
• Department of Nanoscience and Nanoengineering, Dokuz Eylul University, 35160, Buca, Turkey

autor

Ozturk, Y.

• Department of Electrical and Electronics Engineering, Ege University, 35100, İzmir, Turkey
• Center for Production and Applications of Electronic Materials (EMUM), Dokuz Eylul University, 35160, Buca, Turkey

Bibliografia

• [1] Geller S., Gilleo M.A., Acta Crystallogr., 10 (1957), 239.
• [2] Huang B., Ren R., Zhang Z., Zheng S., J. Alloy. Compd., 558 (2013), 56.
• [3] Priye V., Bishnu P.P., Thyagarajan K., J. Light-wave Technol., 16 (2) (1998), 246.
• [4] Sekijima T., Fujii T., Wakino K., Okada M., IEEET. Microw. Theory, 47 (12) (1999), 2294.
• [5] Goldman A., Technological Ferrites, Oxford Publications,1990.
• [6] Standley K.J., Oxide Magnetic Materials, 2. Edn. Clarendon Press, Oxford, 1972.
• [7] Yahya N., Hean G.K., Am. J. Applied Sci., 4 (2) (2007), 80.
• [8] Lee J.W., Oh J.H., Lee J.C., Choi S.C., J. Magn. Magn. Mater., 272 (2004), 2230
• [9] Guo X.Z., Ravi B.G., Devi P.S., Hanson J.C., Margolies J., Gambino R.J., Parise J.B., Sampath S., J. Magn. Magn. Mater, 295 (2005), 145.
• [10] Vaqueiro P., Crosnier-Lopez M.P., Lopezquintela M.A., J. Solid State Chem., 126 (1996), 161.
• [11] Inoue M., Nishikawa T., Nakamura T., Inui T., J. Am. Ceram. Soc., 80 (8) (1997), 2157.
• [12] Kuroda C.S., Taniyama T., Kitamoto Y., Yamazaki Y., J. Magn. Magn. Mater., 241 (2002), 201.
• [13] Matsumoto K., Yamamoto S., Yamanobe Y., Ueno A., Yamaguchi K., Fujii T., Jpn. J. Appl. Phys., 30 (1991), 1696.
• [14] Kim T., Nasu S., Shima M., J. Nanopart. Res., 9 (2007), 737.
• [15] Gomi M., Furuyama H., Abe M., J. Appl. Phys., 70 (11) (1991), 7065.
• [16] Niyaifar R.M., Radhakrishna M.C., Hassnpour A., Mozaffari M., Amighian J., Hyp. Interact., 187 (2008), 137.
• [17] Mao T.C., Chen J.C., J. Magn. Magn. Mater., 302 (1) (2006), 74.
• [18] Kum J.S., Kim S.J., Shim I.B., Kim C.S., IEEE T. Magn., 39 (5) (2003), 3118.
• [19] Xu H., Yang H., J. Mater. Sci.-Mater. El., 19 (2008), 589.
• [20] Garskaite E., Gibson K., Leleckaite A., Glaser J., Niznansky D., Kareiva A., Meyer H.J., Chem. Phys., 323 (2006), 204.
• [21] Cheng Z., Yang H., Yu L., Xu W., J. Mater. Sci.-Mater. El., 19 (2008), 442.
• [22] Nguyet D.T.T., Duong N.P., Satoh T., Anh L.N., Hien T.D., J. Alloy. Compd., 541 (2012), 18.
• [23] Rashad M.M., Hessien M.M., El-Midany A., Ibrahim I.A., J. Magn. Magn. Mater., 321 (2009), 3752.
• [24] Wei Z., Cuijing G., Rongjin J., Caixiang F., Yanwei Z., Mater. Chem. Phys., 125 (2011), 646.
• [25] Vaqueiro P., Lopez-Quintela M.A., Rivas J., Greneche J.M., J. Magn. Magn. Mater., 169 (1997), 56.
• [26] Cho Y.S., Burdick V.L., Amarakoon V.R.W., J. Am. Ceram. Soc., 80 (6) (1997), 1605.
• [27] Ozturk Y., Erol M., Celik E., Mermer O., Kahraman G., Avgin I., Mater. Tehnol., 47 (1) (2013), 59.
• [28] Rehspringer J.L., Bursik J., Niznansky D., Klarikova A., J. Magn. Magn. Mater., 211 (2000), 291.
• [29] Vajargah S.H., Hosseini H.R.M., Nemati Z.A., Mater. Sci. Eng. B-Adv., 129 (2006), 211.
• [30] Xu H., Yang H., Xu W., Feng S., J. Mater. Process. Tech., 197 (2008), 296.
• [31] Kum J.S., Kim S.J., Shim I., Kim C.S., J. Magn. Magn. Mat., 272 (2004), 2227.
• [32] Vajargah S.H., Hosseini H.R.M., Nemati Z.A., J. Alloy. Compd., 430 (2007), 339.
• [33] Jesus F.S., Cortes C.A., Valenzuela R., Ammar S., Bolarin-Miro A.M., Ceram. Int., 38 (2012), 5257.
• [34] Pinkas J., Reichlova V., Serafimidisova A., Moravec Z., Zboril R., Jancik D., Bezdicka P., J. Phys. Chem. C, 114 (32) (2010), 13557.
• [35] Labuayai S., Siri S., Maensiri S., J. Optoelectron. Adv. M., 10 (2008), 2694.
• [36] Sekijima T., Kishimoto H., Fujii T., Wakino K., Okada M., Jpn. J. Appl. Phys., 38 (1999), 5874.
• [37] Hench L.L., West J.K., Principles of Electronic Ceramics, Wiley, New York, 1990.
• [38] Moulson A.J., Herbert J.M., Electroceramics: Materials, Properties, Applications, Wiley, West Sussex, 2003.
• [39] Wickersheim K.A., Buchanan R.A., J. Appl. Phys., 38 (1967), 1048.
• [40] Xu H., Yang H., Mat. Manuf. Process., 23 (1) (2007), 1.
• [41] Sanchez R.D., Rivas J., Vaqueiro P., Lopezquintela M.A., Caeiro D., J. Magn. Magn. Mat., 247 (2002), 92.
• [42] Mitra S., Das S., Mandal K., Chaudhuri S., Nanotechnology, 18 (2007), 275608.
• [43] Praveena K., Sadhana K., Srinath S., Murthy

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.

Identyfikatory

DOI

10.1515/msp-2016-0036