Simulation of the flattening of high frequency induction welded tubes

• Autorzy: Abboudi, A. , Chermime, B. , Boulahrouz, S.
• Języki publikacji: EN

Abstrakty

EN

The process of destructive and non-destructive testing of the manufacture of high frequency induction welded steel tubes has always give better results at the Labiod-tèbessa Algeria tube construction plant such as tensile testing, folding, flaring and also the flattening tests whose limits of use were given by the experimental methods which have known deficiencies in measures in particular of the parameter of the height H which is given by the equation and that this difficulty is noted between the calculated and measured height levels. For these reasons it is necessary to find a numerical model of simulation which obviously replaces the experimental process to give reliable results with cheaper conditions in terms of cost and time which has been respected which allowed us to collect data. results and compare the different heights calculated and measure and often confirm the experimental tests.

Słowa kluczowe

PL

rury stalowe; spłaszczanie; symulacje; E24-2; H

EN

steel tubes; flattening; traction; removal; simulation; E24-2; H

• Czasopismo: Mechanics and Mechanical Engineering
• Rocznik: 2018
• Tom: Vol. 22, nr 1
• Strony: 273-–284
• Opis fizyczny: Bibliogr. 7 poz., il. kolor., 1 fot., rys., wykr.

Twórcy

autor

Abboudi, A.

• Department of Mechanical Engineering, Abbes Laghrour University, Khenchela, 40000, Algeria,

autor

Chermime, B.

• Department of Mechanical Engineering, Abbes Laghrour University, Khenchela, 40000, Algeria,

autor

Boulahrouz, S.

• Department of Mechanical Engineering, Abbes Laghrour University, Khenchela, 40000, Algeria,

Bibliografia

• [1] Fanchon, J.-L.: Guide des sciences et technologies industrielles, Éd. AFNOR-Nathan, édition 1993.
• [2] Taleb, N. E.: Soudage des aciers, D.E.U.A., 6-8, textbf2006.
• [3] François, Do., Pineau, A., Zaoui, A.: Comportement mécanique des matériaux, Hermes, Paris, 11-12, 1991.
• [4] Factory Document, No. 6, Quality Control - Metallic Materials, Flaring Test On tube - NF EN 10234, 1994.
• [5] The press brake and folding. The Modern Machine (F), 12-5, 1972.
• [6] Med Tahar, H.: Etude du Comportement Mécanique des Joints Soudés lors du Soudage des Tubes par Induction à Haute Fréquence (HF), University Hadj Lakhdar Batna, 2010/2011.
• [7] Factory Document, No. 3, Quality Control - Metal Materials, Flattening Test on tube - NF EN10233, 1994.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).