Warianty tytułu
Języki publikacji
Abstrakty
The exploitation of the deposit necessitates continuous optimisation of the ventilation network, as well as the need to change fans. One way of optimising the network and increasing the efficiency of ventilation may be to make interlevel connections in the form of large-diameter openings. In this study, simulation calculations were carried out by assuming the drilling of large-diameter holes and the selection of parameters for the main ventilation fans. An evaluation of the ventilation network was carried out by checking the validity of the simulation data with the actual data. The ventilation calculations showed that it is possible to increase the ventilation efficiency through the aforementioned method. The results of the calculations are presented with tabular data and simplified ventilation diagrams. The creation of at least one large-diameter opening and the upgrading of the main ventilation fans will ensure a minimum of proper functioning of the ventilation system. The drilling of a further opening will ensure that there is sufficient air in each ventilation area - an increase of 50% in the mine's air volume will be achieved.
Czasopismo
Rocznik
Tom
Strony
99--100
Opis fizyczny
Bibliogr. 12 poz., rys., tab., wykr.
Twórcy
autor
- Faculty of Mining, Safety Engineering and Industrial Automation, Silesian University of Technology, Gliwice, krzysztof.slota@polsl.pl
autor
- Faculty of Mining, Safety Engineering and Industrial Automation, Silesian University of Technology, Gliwice
autor
- Faculty of Mining, Safety Engineering and Industrial Automation, Silesian University of Technology, Gliwice
Bibliografia
- 1. Acuña, E and Lowndes, I 2014. A Review of Primary Mine Ventilation System Optimization. Interfaces 44, 163-175. DOI: 10.1287/inte.2014.0736.
- 2. Acuña, E et al. 2010. Practical mine ventilation optimization based on genetic algorithms for free splitting networks. Proceedings of 13th Mine Ventilation Symposium, Englewood, CO, 379-385.
- 3. Pach, G et al. 2018. Costs reduction of main fans operation according to safety ventilation in mines – a case study. Archives of Mining Sciences 63, 43-60. DOI: 10.24425/118884
- 4. Chatterjee, A et al. 2015. Optimization of mine ventilation fan speeds according to ventilation on demand and time of use tariff. Applied Energy 146, 65-73. DOI: 10.1016/j.apenergy.2015.01.134.
- 5. Wang, J et al. 2022. Regulation and optimization of air quantity in a mine ventilation network with multiple fans. Archives of Mining Sciences 67, 179-193. DOI: 10.24425/ams.2022.140709.
- 6. Bystroń, H 1982. Basic concepts and relationships describing the quasi-stationary flow of moist air through a mine workings in an underground mine. Mining Review 11/12.
- 7. Cross, H 1936. Analysis of flow in networks of conduits or conductors. University of Illinois Engineering Experiment Station Bulletin 286, 1-32.
- 8. Dziurzyński, W and Krawczyk, J 2012. Computational capabilities of selected simulation programs used in global mining describing the flow of air, fire gases and methane in a mine workings network. Mining Review 68, 1-11.
- 9. Dziurzyński, W et al. 2017. Airflow sensitivity assessment based on underground mine ventilation systems modeling. Energies 10, 1451. DOI: 10.3390/en10101451.
- 10. Dziurzyński, W and Kruczkowski, J 2007. Validation of the mathematical model used in the VENTGRAPH programme on the example of the introduction of new headings to the ventilation network of mine. Archives of Mining Sciences 52, 155-169.
- 11. Pawiński, J et al. 1995. Ventilation of mines. Katowice: Silesian Technical Publishers.
- 12. Madeja-Strumińska, B and Strumiński, A 2004. Design of natural forced air flows in underground mines. Wrocław: Wrocław University of Technology.
Uwagi
Opracowanie rekordu ze środków MNiSW, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2024)
Typ dokumentu
Bibliografia
Identyfikatory
Identyfikator YADDA
bwmeta1.element.baztech-bcc1ba57-6099-495f-8c2f-99340dd83703