Investigation of mechanical behavior of friction stir welded joints of AA6063 with AA5083 aluminum alloys

• Autorzy: Kumar, S. Dharani , Kumar, S. Sendhil
• Języki publikacji: EN

Abstrakty

EN

Aluminum alloy finds its applications in various sectors of engineering. This paper discusses the investigation of mechanical characteristics of buttweld joints of aluminium alloy AA6063 along with AA5083. An experiment was conducted for different tool rotational speeds of 600 rpm, 800 rpm and 1000 rpm. Specifications of friction stir welding machine were 4 kN axial load and welding speed of 40 mm/min. Friction stir welded (FSW) joints of higher tensile strength, lower flexural strength and lower impact strength with maximum hardness, for the work piece fabricated at 1000 rpm using a high speed steel tool with a cylindrical profile was observed. Better understanding of the effect of tool rotational speed and mechanical properties was illustrated through the experimental result.

Słowa kluczowe

PL

stop aluminium; wytrzymałość na rozciąganie; udarność; szpilka walcowa

EN

aluminum alloy; tensile strength; impact strength; cylindrical pin profile

• Czasopismo: Mechanics and Mechanical Engineering
• Rocznik: 2019
• Tom: Vol. 23, nr 1
• Strony: 59--63
• Opis fizyczny: Bibliogr. 11 poz., fot., wykr.

Twórcy

autor

Kumar, S. Dharani

• Department of Mechanical Engineering, Sri Eshwar College of Engineering, Coimbatore - 641202, India,

autor

Kumar, S. Sendhil

• Department of Mechanical Engineering, Info Institute of Engineering, Coimbatore - 641107, India,

Bibliografia

• [1] Jannet, S., Mathews, P. K., Raja, R.: “Comparative investigation of friction stir welding and fusion welding of 6061-T6 and 5083-O aluminum alloy based on mechanical properties and microstructure”, Journal of Achievements in Materials and Manufacturing Engineering, 61, 181-186, 2013.
• [2] Kulekci, M. K., Erdinç Kaluç, A. S., Ozden, B.: “Experimental Comparison of MIG And Friction Stir Welding Processes For En Aw-6061-T6 (Al Mg Si Cu) Aluminum Alloy”, The Arabian Journal for Science and Engineering, 35, 321-330, 2009.
• [3] Masayuki, A. and Kazuhiro, N.: Dissimilar Metal Joining of 2024 and 7075 Aluminum Alloys to Titanium Alloys by Friction Stir Welding”, Materials Transactions, 52, 948-952, 2011.
• [4] Da Silva, A. A. M., Arruti, E., Janeiro, G., Aldanondo, E., Alvarez, P. and Echeverria, A.: “Material flow and mechanical behaviour of dissimilar AA2024-T3 and AA7075-T6 aluminium alloys friction stir welds”, Materials & Design, 32, 2021-2027, 2011.
• [5] Jonckheere, C., de Meester, B., Denquin, A. and Simar, A.: “Torque, temperature and hardening precipitation evolution in dissimilar friction stir welds between 6061-T6 and 2014-T6 aluminum alloys”, Journal of Materials Processing Technology, 213, 826-837, 2013.
• [6] Gibson, B. T., Lammlein, D. H., Prater, T. J., Longhurst, W. R., Cox, D. C., Ballun, M. C., Dharmaraj, K. J., Cook, G. E. and Strauss, A. M.: “Friction stir welding: Process, automation, and control”, Journal of Manufacturing Processes, 16, 56-73, 2014.
• [7] Mubiyai, M. P. and Akinlabi, E. T.: Friction Stir Welding of Dissimilar Materials: An Overview, World Academy of Science, Engineering and Technology International Journal of Mechanical, Aerospace, Industrial, Mechatronics and Manufacturing Engineering, 7, 635-640, 2013.
• [8] Donatuset, U. al., “Areas of concern in an anodized dissimilar friction stir weld of AA5083 and AA6082 aluminium alloys,” The International Journal of Surface Engineering and Coatings, 2967, 2016.
• [9] Li, Z., Xu, Z., Zhang, L. and Yan, Z.: “Friction spot welding of dissimilar 6063/5083 aluminium alloys,” Mater. Sci. Technol., 1-9, 2017.
• [10] Palanivel, R., KoshyMathews, P. and Murugan, N.: “Influences of Tool Pin Profile on the Mechanical and Metallurgical Properties of Friction Stir Welding of Dissimilar AluminumAlloy”, International Journal of Engineering Science and Technology, 2, 2109-2115, 2010.
• [11] Shanmuga Sundaram, N. and Murugan, N.: “Tensile behavior of dissimilar friction stir welded joints of aluminium alloys”, Materials & Design, 31, 4184-4193, 2010.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).

Identyfikatory

DOI

10.2478/mme-2019-0008