The building application of foam concrete combined with PCM in cold regions and its energy efficiency

• Autorzy: Wang, Huifang
• Języki publikacji: EN

Abstrakty

EN

Building performance in cold regions greatly affects the quality of people living in the building. With the further development of the construction industry, how to improve the energy efficiency of buildings in cold regions has become one of the key issues. The study introduces paraffin phase change capsules as aggregate components on the basis of foam concrete, and then designs a matching energy efficiency analysis method to regulate the concrete parameters, and finally tests the performance of the research method and conducts an application analysis. The experimental results show that in performance simulation testing, the internal surface temperature decreases to 288.2 K at the minimum when the external temperature is 0ºC to 4ºC. It shows that the research method can effectively analyze the building performance, and the analysis method can optimize the performance of the foam concrete materials proposed in the research, and obtain building materials with better thermal insulation performance than the existing conventional materials. Research can provide certain technical references for building energy conservation in cold regions.

Słowa kluczowe

PL

region zimny; beton piankowy; kapsułka; przemiana fazowa; parafina; wydajność energetyczna; model przewodzenia ciepła

EN

cold region; foam concrete; paraffin; phase change; capsule; energy efficiency; heat transfer model

• Czasopismo: Archives of Civil Engineering
• Rocznik: 2024
• Tom: Vol. 70, nr 3
• Strony: 531--544
• Opis fizyczny: Bibliogr. 24 poz., il.

Twórcy

autor

Wang, Huifang

• Department of Architecture Engineering, Yangzhou Polytechnic Institute, Yangzhou, China,

Bibliografia

• [1] A.A. Jhatial, W.I. Goh, T.A. Rind, and A. Kumar, “Thermal performance simulation of eco-friendly lightweight foamed concrete incorporating palm oil fuel ash and eggshell powder using ABAQUS”, Silicon, vol. 14, no. 3, pp. 1263-1283, 2022, doi: 10.1007/s12633-020-00907-2.
• [2] J. Burger, E. Lloret-Fritschi, F. Scotto, T. Demoulin, L. Gebhard, J. Mata-Falcón, and R.J. Flatt, “Eggshell: Ultra-thin three-dimensional printed formwork for concrete structures”, 3D Printing and Additive Manufacturing, vol. 7, no. 2, pp. 48-59, 2020, doi: 10.1089/3dp.2019.0197.
• [3] C.L. Pan, C.C. Huang, M. Su, and J.L. Peng, “Influence of hold-down anchors on lateral strength of cold-formed steel wall framing”, Steel Construction, vol. 13, no. 4, pp. 305-316, 2020, doi: 10.1002/stco.201900043.
• [4] Y. Chen, B. Wang, B. Zhang, Q. Zheng, J. N. Zhou, F. N. Jin, and H. L. Fan, “Polyurea coating for foamed concrete panel: an efficient way to resist explosion”, Defence Technology, vol. 16, no. 1, pp. 136-149, 2020, doi: 10.1016/j.dt.2019.06.010.
• [5] G. Crini, E. Lichtfouse, G. Chanet, and N. Morin-Crini, “Applications of hemp in textiles, paper industry, insulation and building materials, horticulture. animal nutrition, food and beverages, nutraceuticals, cosmetics and hygiene, medicine, agrochemistry, energy production and environment: A review”, Environmental Chemistry Letters, vol. 18, no. 5, pp. 1451–1476, 2020, doi: 10.1007/s10311-020-01029-2.
• [6] Y. Lin and W. Yang, “Tri-optimization of building shape and envelope properties using Taguchi and constraint limit method”, Engineering, Construction and Architectural Management, vol. 29, no. 3, pp. 1284-1306, 2022, doi: 10.1108/ECAM-05-2020-0327.
• [7] L. Zhang, Z. Chen, H. Dong, S. Fu, L. Ma, and X. Yang, “Wood plastic composites based wood wall’s structure and thermal insulation performance”, Journal of Bioresources and Bioproducts, vol. 6, no. 1, pp. 65-74, 2021, doi: 10.1016/j.jobab.2021.01.005.
• [8] X. Sun, Y. Zhang, K. Xie, and M.A. Medina, “A parametric study on the thermal response of a building wall with a phase change material (PCM) layer for passive space cooling”, Journal of Energy Storage, vol. 47, no. 3, art. no. 103548, 2022, doi: 10.1016/j.est.2021.103548.
• [9] S. Esbati, M.A. Amooie, M. Sadeghzadeh, M.H. Ahmadi, F. Pourfayaz, and T. Ming, “Investigating the effect of using PCM in building materials for energy saving: Case study of sharif energy research institute”, Energy Science & Engineering, vol. 8, no. 4, pp. 959-972, 2020, doi: 10.1002/ese3.328.
• [10] Q. Xue, Z. Wang, and Q. Chen, “Multi-objective optimization of building design for life cycle cost and CO2 emissions: A case study of a low-energy residential building in a severe cold climate”, Building Simulation, vol. 15, no. 1, pp. 83-98, 2022, doi: 10.1007/s12273-021-0796-5.
• [11] S.K. Lim, K.P. Foo, F.W. Lee, H.Y. Tiong, and Y.J. King, “Acoustic properties of lightweight foamed concrete with eggshell waste as partial cement replacement material”, Sains Malaysiana, vol. 50, no. 2, pp. 537-547, 2021, doi: 10.17576/jsm-2021-5002-24.
• [12] A.A. Jhatial, W.I. Goh, A.K. Mastoi, A.F. Traore, and M. Oad, “Environmental assessment and mechanical properties of Polypropylene fibres reinforced ternary”, Environmental Science and Pollution Research, vol. 29, no. 2, pp. 2985-3007, 2022, doi: 10.1007/s11356-021-15076-x.
• [13] S. Na, W. Lee, and M. Song, “Hardening properties of foamed concrete with circulating fluidized bed boiler ash, blast furnace slag, and desulfurization gypsum as the binder”, Open Journal of Civil Engineering, vol. 11, no. 3, pp. 301-316, 2021, doi: 10.4236/ojce.2021.113018.
• [14] J. Shi, Y. Liu, H. Xu, Y. Peng, Q. Yuan, and J. Gao, “The roles of cenosphere in ultra-lightweight foamed geopolymer concrete (UFGC)”, Ceramics International, vol. 48, no. 9, pp. 12884-12896, 2022, doi: 10.1016/j.ceramint.2022.01.161.
• [15] J. Stolz, Y. Boluk, and V. Bindiganavile, “Correlating the cellular network, in foamed concrete containing ash, with their physical properties”, Canadian Journal of Civil Engineering, vol. 48, no. 12, pp. 1620-1629, 2021, doi: 10.1139/cjce-2019-0265.
• [16] I. Upasiri, K. Konthesingha, A. Nanayakkara, et al., “Evaluation of fire performance of lightweight concrete wall panels using finite element analysis”, Journal of Structural Fire Engineering, vol. 12, no. 3, pp. 328-362, 2021, doi: 10.1108/JSFE-10-2020-0030.
• [17] H.B. Ly, M.H. Nguyen, and B.T. Pham, “Metaheuristic optimization of Levenberg-Marquardt-based artificial neural network using particle swarm optimization for prediction of foamed concrete compressive strength”, Neural Computing and Applications, vol. 33, no. 24, pp. 17331-17351, 2021, doi: 10.1007/s00521-021-06321-y.
• [18] S.S. Suhaili, M.A.O. Mydin, and H. Awang, “Influence of mesocarp fibre inclusion on thermal properties of foamed concrete”, Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, vol. 87, no. 1, pp. 1-11, 2021.
• [19] E. Nsugbe, “Toward a self-supervised architecture for semen quality prediction using environmental and lifestyle factors”, Artificial Intelligence and Applications, vol. 1, no. 1, pp. 35-42, 2023, doi: 10.47852/bonviewAIA2202303.
• [20] B. Li, L. You, M. Zheng, Y. Wang, and Z. Wang, “Energy consumption pattern and indoor thermal environment of residential building in rural China”, Energy and Built Environment, vol. 1, no. 3, pp. 327-336, 2020, doi: 10.1016/j.enbenv.2020.04.004.
• [21] S. Choudhuri, S. Adeniye, and A. Sen, “Distribution alignment using complement entropy objective and adaptive consensus-based label refinement for partial domain adaptation”, Artificial Intelligence and Applications, vol. 1, no. 1, pp. 43-51, 2023, doi: 10.47852/bonviewAIA2202524.
• [22] M.U. Danjuma, B. Yusuf, and I. Yusuf, “Reliability, availability, maintainability, and dependability analysis of cold standby series-parallel system”, Journal of Computational and Cognitive Engineering, vol. 1, no. 4, pp. 193-200, 2022, doi: 10.47852/bonviewJCCE2202144.
• [23] M. Barma and U. M. Modibbo, “Multiobjective mathematical optimization model for municipal solid waste management with economic analysis of reuse/ recycling recovered waste materials”, Journal of Computational and Cognitive Engineering, vol. 1, no. 3, pp. 122-137, 2022, doi: 10.47852/bonviewJCCE149145.
• [24] M.E. Kohansal, H.R. Akaf, J. Gholami, and S. Moshari, “Investigating the simultaneous effects of building orientation and thermal insulation on heating and cooling loads in different climate zones”, Architectural Engineering and Design Management, vol. 18, no. 4, pp. 410-433, 2022, doi: 10.1080/17452007.2021.1901220.

Identyfikatory

DOI

10.24425/ace.2024.151000