Analysis of structural properties for AlSi11 alloy with use of thermal derivative gradient analysis TDGA

• Autorzy: Cholewa, M. , Kondracki, M.
• Języki publikacji: EN

Abstrakty

EN

In this paper a basis of thermal derivative gradient analysis was shown. Authors presented methodology of the studies, results and analysis. Studies of crystallization kinetics were conducted on non-modified AlSi11 eutectic alloy. Analyzing the results authors proposed some parameters for description of crystallization kinetics and their relation to microstructure and mechanical properties.

Słowa kluczowe

PL

mikrostruktura; stop Al-Si; metoda ATD

EN

microstructure; alloy Al-Si; TDA method

• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2008
• Tom: Vol. 8, iss. 3s
• Strony: 84--88
• Opis fizyczny: Bibliogr. 34 poz., rys., tab., wykr.

Twórcy

autor

Cholewa, M.

• Silesian University of Technology, Department of Foundry, Towarowa St 7, 44-100 Gliwice, Poland,

autor

Kondracki, M.

• Silesian University of Technology, Department of Foundry, Towarowa St 7, 44-100 Gliwice, Poland

Bibliografia

• [1] Jura S.: Novel methods of alloy quality evaluation, PAN Katowice, 1985, p. 69 (in Polish).
• [2] Fraś E: Crystallization of metals. WNT, Warszawa 2003(in Polish).
• [3] Braszczyński J.: Crystallization. of castings. WNT Warszawa 1991 (in Polish).
• [4] Mollard F., Flemings M.: Trans. of the Metall. Sci. AIME, v. 239, 1967, s. 1526.
• [5] Flemings M.: Solidification processing, Met. Trans., vol. 5, 1974, s. 2121.
• [6] Burden M.H., Hunt J.D., J. Cryst. Growth, Trans., vol. 22, 1974, s. 109.
• [7] Toluoi B., Hellawell A.: Acta Metall., v. 24, 1976, s. 565.
• [8] Kurtz W., Fisher D. J.: Acta Metall., v. 28, 1980, s. 777.
• [9] Kac A.,M.: Lit. Proizw., v. 7, Moskwa, 1980, s. 2.
• [10] Fraś E.: Theoretical fundamentals of crystallization part I, Metals and single phase alloys, Wyd. AGH, Kraków, 1984. (in Polish).
• [11] Miyata Y., Suzuki T., Uno J.: Metall. Trans. v. 16A, 1985, s. 1799.
• [12] Braszczynski J.: Theory of casting process , PWN, Warszawa, 1989. (in Polish).
• [13] Liu J., Zhan Y., Shang B.: Acta Metall. Mater., v. 38, 1990, s. 1625.
• [14] Fraś E., Solidification of metals and alloys, PWN, Warszawa, 1992. (in Polish).
• [15] Jaquet J.C., Hotz W.: Cast Metals, v. 4, nr 4, 1992, s. 200.
• [16] Khan S., Ourdjini A., Eliot R.: Mater. Sci. Technol. v. 8, 1992, s. 516.
• [17] Khan S., Eliot R.: Acta Metall. Mater., v. 41, 1993, s. 2433.
• [18] Schindelbacher G.: Gießerei - Praxis, v. 17, 1995, s. 309.
• [19] Górny Z., Sobczak J.: Cast composites , ed. J. Suchy, Comission 8.1. Cast Composites, CIATF, Opole, 1995, s. 39. (in Polish).
• [20] Braszczyński J. ,Zyska A.: Arch. Techn. Masz. i Autom., v.18 nr specj., Poznań, 1998, s. 98. (in Polish).
• [21] Majchrzak E., Mochnacki B., Suchy J.S.: Int. J. Cast Metals Res., 1999, nr 12, s. 241.
• [22] Majchrzak E., Mochnacki B., Suchy J.S.: 5 th World Conf. on the Comp. Modell. of Free end Mov. Bound. Probl. Moving Boundaries, Ljubljana, Slovenija, 1999, s. 37.
• [23] Ares A.E., Schvezov C.E.: Metall. And Mater. Trans.v. 31A, 2000, s. 1611.
• [24] Pietrowski S., Pisarek B., Gumienny G.: Archives of Foundry Engineering. Vol. 8, Issue 1, 2008, p 101-108.
• [25] Odorizzi S. i in.: Servizi Grafici Edytoriali, Padva, Italy, 2001.
• [26] Brown S., Spittle J.A., JanesJ.D.: J.of Mater., 2002, s. 45.
• [27] Hajkowski M.: Forecasting of mechanical properties for castings, Wyd. Pol. Pozn., Scientific Works no 376, Poznań, 2003. (in Polish).
• [28] www.mse.mtu.edu.aluminium-silicon alloy castings, 2005.
• [29] Cholewa M.: Solidification kinetics of dispersive composites, Wyd. Pol. Śl., Scientific Works no 151, 2005. (in Polish).
• [30] Cholewa M.: Archiwum Technologii Maszyn i Automatyzacji, Komisja Budowy Maszyn PAN, Poznań, 2004, v. 24, nr 1, s. 39. (in Polish).
• [31] Cholewa M.: Kompozyty, v. 4, nr 2(22), Polskie Towarzystwo Materiałów Kompozytowych, Częstochowa, 2004, s. 444 (in Polish).
• [32] Cholewa M.: Archives of Foundry , v. 22, 2006, s. 111 (in Polish).
• [33] Cholewa M.: Innovation in Foundry Engineering , part I, Wyd. Instytut Odlewnictwa w Krakowie, 2007, s. 169 (in Polish).
• [34] www.zjura.sownet.pl/z-tech, 2008.