The influence of amount of filler on mechanical properties for electro products

• Autorzy: Dulebova, L. , Greskovic, F.
• Języki publikacji: EN

Abstrakty

EN

In order to favorably influence some product manufacture qualities of plastics (an increase of mechanical properties, chemical resistance, etc.), or by reason of reduction in price of finished plastic product, the fillers are added to plastic materials. The contribution deals with the change of mechanical properties of selected types of plastics with different % of glass filler. The mechanical properties were measured by tensile test and Charpy impact test in a standard ambient and after degradation of materials by UV radiance. The fracture areas of studied materials were observed on scanning microscope.

Słowa kluczowe

PL

przemysł elektrotechniczny; tworzywa sztuczne; właściwości mechaniczne; jakość produkcji

EN

electrotechnical indystry; plastics; mechanical properties; quality of production

• Czasopismo: Zeszyty Naukowe Politechniki Rzeszowskiej. Mechanika
• Rocznik: 2010
• Tom: z. 80 [274]
• Strony: 59-64
• Opis fizyczny: Bibliogr. 4 poz., tab., rys., wykr.

Twórcy

autor

Dulebova, L.

autor

Greskovic, F.

• Technical University in Košice, Košice, Slovakia

Bibliografia

• 1. Hrivňák I.: Fraktogrąfia. STU MTF v Trnave. Bratislava 2009
• 2. Greškovič F., Dulebová L’., Varga J.: Technológie spracowania plastov. Vstrekovanie. TU v Košiciach, Strojnícka fakulta. 200 s. ISBN 978-80-553-0369-7.
• 3. Förtsch W., Franz H.E., Friedrich K.: Microfractographic Aspects of Interfaces in Creep under Fatigue Loading. Proc. 28th Risø International Symposium on Materials Science: Interface Design of Polymer Matrix Composites - Mechanics, Chemistry, Modelling and Manufacturing, Risø National Laboratory, Roskilde, Denmark, 2005.
• 4. Materiálové listy materiálov: Slovamid 6 GF 30, Slovamid 6 GF 25 FRA, Makrolon 9415 / Z.