Possibility of mechanical deposition of protective Zn coatings

• Autorzy: Brezinova, J. , Guzanova, A.
• Konferencja: Mechanics 2008 / International Scientific Conference (VI; 2008; Rzeszow, Poland)
• Języki publikacji: EN

Abstrakty

EN

This paper presents actual investigation results of experiment that was oriented to the verification of the possibility of applying zinc on steel surface by blasting technology using zinc-coated cut wire. Suitable method for zinc layers deposition and evaluation of their corrosion resistance was determined. Accelerated laboratory tests with presence of SO2 and long term working tests in atmospheric conditions was used. Creation of incoherent zinc coatings was established on the bases of metallographic and spectral analysis. Process of cold zinc by blasting is able to use as temporary anticorrosion protection of steel surface.

Słowa kluczowe

PL

powłoka ochronna; warstwa cynkowa; osadzanie mechaniczne

EN

protective coating; zinc layer; mechanical deposition; blasting technology

• Czasopismo: Zeszyty Naukowe Politechniki Rzeszowskiej. Mechanika
• Rocznik: 2008
• Tom: z. 73 [253]
• Strony: 47-53
• Opis fizyczny: Bibliogr. 12 poz., tab., rys., wykr.

Twórcy

autor

Brezinova, J.

autor

Guzanova, A.

• Faculty of Mechanical Engineering, Technical university of Kosice, Slovakia

Bibliografia

• 1. Palček P., Hadzima B., Bokuvka O., Chalupová M., Nový F.: Corrosion resistance of magnesium and its alloys. Komunikácie, 3, 2003, s.21.
• 2. Kniewald D., Brezinová J.,: Zmeny akosti kovovehó povrchu po tryskaní. In: 35th International Conference on Coatings Technology, ČR. Pardubice 2004, s.489-196, ISBN 80-7194-660-5.
• 3. Kováč J. et all.: Hodnotenie aktivity otryskaných povrchov na základe merania ich elekfrodóvých potenciálov. in: Koroze a ochrana materiálu, 2002, roč.45, č.5, s.103-107, ISSN-1335-1532.
• 4. Kocich J.,. Tuleja S.: Korózia a ochrana kovov. VŠT v Košiciach, SjF, ALFA Bratislava, 1983, 119s.
• 5. Kováč J., Brezinová J., Kniewald P.: Vplyv zmeny režimu tryskania na aktivitu otryskanéhopovrchu. Acta Metallurgica Slovaca 2/2001, roč.7, s.177-183, ISSN 1335-1532.
• 6. Skočovský P. et all.: Náuka o materiáli pre odbory strojnicke. Žilinska univerzita v Žiline, 2001, s.167-171, ISBN 80-7100-831-1.
• 7. Zerust Worldwide Corrosion Prevention. www.fatrani.cz
• 8. Hadzima B., Palček P., Chalupová M.: The development of the magnesium alloys strutcture at artificial ageing. Acta Metallurgica Slovaca, Vol.10, special issue 1/2004, 2004.
• 9. Brezinova J.: Štúdium zákonitosti procesu tryskania z aspektu degradačnych javov. Doktorandská dizertačna praca, SjF TU Košice, 2002.
• 10. Hadzima B., Palček P., Demitrovová I.: Environment influence to electrochemical characteristics of AZ31 and AZ80 magnesium alloys. In.: Proc. of 21st Danubia Adria symposium on Experimental Methods in Solid Mechanics. Eds.: Jecić S., Semenski D. Croatian Society of Mechanics, Zagreb, 2004, p. 154
• 11. Kniewald D., Brezinová J.: Study of process cold zinc by blasting. CO-MAT-TECH 2003. Trnava, 2003, s.485-488, ISBN 80-227-1413-5.
• 12. Brezinová J.: Dočasná ochrana studeným zinkovaním. Povrchové inžinierstvo 2003, Acta Mechanica Slovaca, 4-A/2003. roč.7. s. 29-32, ISSN 1335-2393.