Możliwości zastosowania techniki ICP-OES do oznaczania zawartości siarki w produktach naftowych

Janko, P.; Zarzycka, E.

Ten serwis zostanie wyłączony 2025-02-11.

Nowa wersja platformy, zawierająca wyłącznie zasoby pełnotekstowe, jest już dostępna.
Przejdź na https://bibliotekanauki.pl

Artykuł - szczegóły

Czasopismo

LAB Laboratoria, Aparatura, Badania

2005 | R. 10, nr 4 | 6-16

Tytuł artykułu

Możliwości zastosowania techniki ICP-OES do oznaczania zawartości siarki w produktach naftowych

Autorzy

Janko, P. , Zarzycka, E.

Warianty tytułu

Języki publikacji

Abstrakty

Słowa kluczowe

zawartość siarki produkty naftowe ICP-OES pomiar zawrtości siarki

sulphur content petroleum products ICP-OES detection of sulphur content

Wydawca

Czasopismo

LAB Laboratoria, Aparatura, Badania

Rocznik

2005

Tom

R. 10, nr 4

Strony

6-16

Opis fizyczny

Bibliogr. 36 poz.

Twórcy

autor

Janko, P.

autor

Zarzycka, E.

Polskie Linie Lotnicze LOT S.A., Zakład Badań Chemicznych, Warszawa, chemlab@lot.pl

Bibliografia

1. World-Wide Fuel Charter, December 2002
2. Mark Weiss, CONTROL, June 07, 2002
3. ASTM D6428-99 Test Method for Total Sulfur in Liquid Aromatic Hydrocarbons and Their Derivatives by Oxidative Combustion and Electrochemical Detection
4. CANADIAN ENVIRONMENTAL PROTECTION ACT, 1999. Sulphur in Diesel Fuel Regulations SOR/2002-254, P.C. 2002-1232 17 July, 2002
5. ASTM D5453-04 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
6. Directive 2003/17/Ec Of The European Parliament And Of The Council of 3 March 2003 amending Directive 98/70/EC relating to the quality of petrol and diesel fuels
7. Rozporządzenie Ministra Gospodarki, Pracy I Polityki Społecznej z dnia 23 grudnia 2003 r. w sprawie wymagań jakościowych dla paliw ciekłych (Dz. U. Nr 230, poz. 2297)
8. PN-EN 228:2005(U) Paliwa do pojazdów samochodowych. Benzyna bezołowiowa. Wymagania i metody badań
9. PN-EN 590:2005(U) Paliwa do pojazdów samochodowych. Oleje napędowe. Wymagania i metody badań
10. Commission Directive 2000/71/EC of 7 November 2000 to adapt the measuring methods as laid down in Annexes I, II, III and IV to Directive 98/70/EC of the European Parliament and of the Council to technical progress as foreseen in Article 10 of that Directive.
11. ASTM D129-00: Standard Test Method for Sulfur in Petroleum Products (General Bomb Method)
12. ASTM D1266-98(2003)e1 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
13. ASTM Dl552-03 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
14. ASTM D2622-03 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
15. EN ISO 14596:1998 Petroleum products - Determination of sulfur content-Wavelength-dispersive X-ray fluorescence spectrometry
16. ASTM D3120-03a Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
17. ASTM D4045-04 Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry
18. ASTM D4294-03 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectrometry
19. ASTM D4927-05 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components-Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
20. ASTM D6334-98(2003)e1 Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence
21. ASTM D6445-99(2004)e1 Standard Test Method for Sulfur in Gasoline by Energy-Dispersive X-ray Fluorescence Spectrometry
22. EN ISO 20846:2004 Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method
23. EN ISO 20847:2004 Petroleum products - Determination of sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry
24. EN ISO 20884:2004 Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry
25. EN ISO 24260:1994 Petroleum products and hydrocarbons - Determination of sulfur content - Wickbold combustion method
26. EN ISO 8754:2003 Petroleum products - Determination of sulfur content-Energy-dispersive X-ray fluorescence spectrometry
27. ASTM D4951-02 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
28. ASTM D5185-02e2 Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
29. PN-V-04030:2000 Oznaczanie zawartości pierwiastków w paliwach płynnych i produktach podobnych metodą emisyjnej spektrometrii atomowej z plazmą indukcyjnie wzbudzoną
30. R.A. Kishore Nadkarni, American Laboratory, November 2000, p.24, Determination of sulfur in petroleum products and lubricants: A critical review of test performance
31. R.A. Kishore Nadkarni, World Refining, June 2000, p. 14, Sulfur Special report. Determining Trace Amounts of Sulfur in Petroleum Products
32. Aviation fuel quality requirements for jointly operated systems (AFQRJOS), Issue 20 - March 2005
33. ASTM D1655-04a Standard Specification for Aviation Turbine Fuels
34. DEF STAN 91/91 Ministry of Defence Defence Standard 91-91, Issue 4 Publication Date 14 June 2002, Turbine Fuel, Aviation Kerosine Typ Jet A-1 NATO Code: F-35 Joint Service Designation: AVTUR
35. ASTM D910-04a Standard Specification for Aviation: Gasolines
36. DEF STAN 91/90 Ministry of Defence Standard; 91-90/lssue1 (DERD2485), 8 May 1996, Gasoline, Aviation Grades 80/87,100/130 And 100/130 Low Lead Joint Service Designation: Avgas 80 Avgas 100 And Avgas 100LL

Typ dokumentu

Bibliografia

Identyfikatory

Identyfikator YADDA

bwmeta1.element.baztech-article-LOD3-0007-0028