Warianty tytułu
Języki publikacji
Abstrakty
Recirculating combustion is an attractive approach to combustion of gases. It can increase its thermal efficiency and reduce harmful emissions. The paper systematises recirculating combustion regimes by using two characterisation parameters, i.e. [delta]T COMBUSTION and [delta]T RECIRCULATION. Within the proposed comparative framework the boundaries between four practical recirculating combustion regimes, i.e. mild, HICOT, feedback and catalytic combustion are identified. Typical bifurcation behaviours of recirculating processes are presented. Recent advances in recirculating combustion are discussed. Practical examples of recirculating combustion systems are introduced.
Słowa kluczowe
Czasopismo
Rocznik
Tom
Strony
24-36
Opis fizyczny
Bibliogr. 31 poz., rys.
Twórcy
autor
- Wroclaw University of Technology Wybrzeze Wyspianskiego 27, 50-370 Wroclaw, Poland, wojciech.budzianowski@pwr.wroc.pl
Bibliografia
- [1] Weinberg F.: Heat-recirculating burners: Principles and some recent developments. Combustion Science and Technology, 121, (1996), 3-22.
- [2] Katsuki M., Hasegawa T.: The science and technology of combustion in highly preheated air. Proceedings of the Combustion Institute, 27, (1998), 3135-3146.
- [3] Barra A.J., Ellzey J.L.: Heat recirculation and heat transfer in porous burners. Combustion and Flame, 137, (2004), 230-241.
- [4] Budzianowski W.M., Miller R.: Superadiabatic lean catalytic combustion in a high-pressure reactor. International Journal of Chemical Reactor Engineering, 7, (2009), A20.
- [5] Budzianowski W.M., Miller R.: Towards improvements in thermal efficiency and reduced harmful emissions of combustion processes by using recirculation of heat and mass: A review. Recent Patents on Mechanical Engineering, 2, (2009), 228-239.
- [6] Budzianowski W.M.: Mass-recirculating systems in CO2 capture technologies: A review. Recent Patents on Engineering, 4, (2010) 15-43.
- [7] Budzianowski W.M.: A rate-based method for design of reactive gas-liquid systems. Rynek Energii, (4), (2009), 21-26 (in Polish).
- [8] Budzianowski W.M., Miller R.: Catalytic converters and processes in selected energy technologies: I. gas turbines and II. radiant burners in drying. Recent Patents on Chemical Engineering, 2, (2009), 181-206.
- [9] Miller R.: Combustion of waste gases. Oficyna Wydawnicza Politechniki Wrocławskiej, Wrocław (2010).
- [10] Yang W., Ponzio A., Lucas C., Błasiak W.: Performance analysis of a fixed-bed biomass gasifier using high-temperature air. Fuel Processing Technology, 87, (2006), 235-245.
- [11] Budzianowski W.M., Miller R.: Auto-thermal combustion of lean gaseous fuels utilizing a recuperative annular double-layer catalytic converter. Canadian Journal of Chemical Engineering, 86, (2008), 778-790.
- [12] Veser G., Schmidt L.D.: Ignition and extinction in the catalytic oxidation of hydrocarbons over platinum. AIChE Journal, 42, (1996), 1077-1087.
- [13] McCarty J.G.: Durable catalysts for cleaner air. Nature, 403, (2000), 35-36.
- [14] Teodorczyk A., Drobniak P., Dabkowski A.: Fast turbulent deflagration and DDT in hydrogen-air mixtures in small obstructed channel. International Journal of Hydrogen Energy, 34, (2009), 5887-5893.
- [15] Cho J.-H., Lin C.S., Richards C.D., Richards R.F., Ahn J., Ronney P.D.: Demonstration of an external combustion micro-heat engine. Proceeding of the Combustion Institute, 32, (2009), 3099-3105.
- [16] Ronney P.D.: Analysis of non-adiabatic heat-recirculating combustors. Combustion and Flame, 135, (2003), 421-439.
- [17] Lee K.H., Kwon O.C.: Studies on a heat-recirculating microemitter for a micro thermophotovoltaic system. Combustion and Flame, 153, (2008), 161-172.
- [18] Dobski T., Slefarski R., Jankowski R.: Combustion gases in highly preheated air (HiTAC) technology. Archivum Combustionis, 28, (2008), 173-186.
- [19] Normann F., Andersson K., Leckner B., Johnsson F.: Emission control of nitrogen oxides in the oxy-fuel process. Progress in Energy and Combustion Science, 35, (2009), 385-397.
- [20] Liu H., Okazaki K.: Simultaneous easy CO2 recovery and drastic reduction of SOx and NOx in O2/CO2 coal combustion with heat recirculation. Fuel, 82, (2003), 1427-1436.
- [21] Park J., Park J.S., Kim H.P., Kim J.S., Kim S.C., Choi J.G., Cho H.C., Cho K.W., Park H.S.: NO emission behavior in oxy-fuel combustion recirculated with carbon dioxide. Energy and Fuels, 21, (2007), 121-129.
- [22] Krishnamurthy N., Paul P.J., Błasiak W.: Studies on low-intensity oxy-fuel burner. Proceedings of the Combustion Institute, 32, (2009), 3139-3146.
- [23] Arghode V.K., Gupta A.K.: Effect of flow field for colorless distributed combustion (CDC) for gas turbine combustion. Applied Energy, 87, (2010), 1631-1640.
- [24] Zheng M., Reader G.T., Hawley J.G.: Diesel engine exhaust gas recirculation - a review on advanced and novel concepts. Energy Conversion and Management, 45, (2004), 883-900.
- [25] Werle S., Wilk R.K.: Investigation on the ignition phenomenon of gaseous fuels in high temperature oxidizer. Archivum Combustionis, 28, (2008), 121-128.
- [26] Levy Y., Sherbaum V., Erenburg V.: Effect of the recirculating gases on the MILD combustion regime. International Journal of Turbo and Jet Engines, 26, (2009), 9-18.
- [27] Shibata Y., Kawakami T., Teodorczyk A.: Effects of water vapor and CO2 addition on combustion characteristics for lean hydrocarbon-air mixtures under normal and microgravity conditions. Archivum Combustionis, 28, (2008), 197-205.
- [28] Liuzzo G., Verdone N., Bravi M.: The benefits of flue gas recirculation in waste incineration. Waste Management, 27, (2007), 106-116.
- [29] Belokon A.A., Touchton G.L. III: WO2005012793.
- [30] Chauvel E., Marti M.M., Masson G., William J.: FR20082916245.
- [31] Kim T.S., Park S.G.: KR20040019735.
Typ dokumentu
Bibliografia
Identyfikatory
Identyfikator YADDA
bwmeta1.element.baztech-article-BWM4-0030-0013