The wire rod superficial processing and the quality and environmental criterion

• Autorzy: Karkoszka, T. , Szewieczek, D.
• Języki publikacji: EN

Abstrakty

EN

Purpose: Purpose of the presented paper is meant to enlight the common points between the application of practically well-matched methods of investigation and opinion of quality and usage of the modern technical, technological or organizational solutions, in this issue in the technological processes of preparation the wire rod surface to the plastic processing. Design/methodology/approach: Applied for the survey has comprised the adequate integrated expert methods of technological processes’ analysis and opinion, as well as the integrated opinion of technological processes using the Integrated Risk Ratio. Findings: of the led survey are as follows: the realization of quality and environmental policy in accordance with the proposed model results in the improvement of analyzed productive processes of steel wire rod, and in consequence-to their optimization both in the range of view of products quality and in the aspect of quality of environmental influence. Practical implications: Can refer to the substituting the chemical etching of wire rod by taking advantage of the technology, taking into account the method of mechanical removing of cinder. Originality/value: of the presented paper has been achieved by application of the new methodology covering the usage of integrated opinion of technological processes, including the Integrated Risk Ratio.

Słowa kluczowe

PL

system zarządzania jakością; zarządzanie środowiskiem; analiza procesu technologicznego

EN

quality management; environmental management; technological process analysis; integrated risk ratio

• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2008
• Tom: Vol. 31, nr 2
• Strony: 778-785
• Opis fizyczny: Bibliogr. 22 poz., wykr., tab.

Twórcy

autor

Karkoszka, T.

autor

Szewieczek, D.

• Division of Materials Processing Technology, Management and Computer Techniques in Materials Science, Institute of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland,

Bibliografia

• [1] M. Bobrek, M. Sokovic, Implementation of APQP-concept in design of QMS, Proceedings of the 13th International Scientific Conference „Achievements in Mechanical and Manufacturing Engineering” AMME'2005, Gliwice-Wisła, 2005, 35-38.
• [2] M. Dudek-Burlikowska, Quality research methods as a factor of improvement of preproduction sphere, Journal of Achievements in Materials and Manufacturing Engineering 18 (2006) 435-438.
• [3] B. Golis, J. W. Pilarczyk, M. Łakomy, S. Bidas, Influene of the geometrical structure of wire rode surface on the wire properties, Proceedings of the International Conference „Wire rod processing. Chosen aspects in theory and practice”, Zabrze, 1987, 38-44.
• [4] A. Kania, M. Spilka, Optimization as an alternative in search of sustainable technological processes, Journal of Achievements in Materials and Manufacturing Engineering 17 (2006) 413-416.
• [5] T. Karkoszka, Modeling of the chosen processes the steel wire technology with regard to quality policy and environmental protection, PhD Thesis, Gliwice, 2004.
• [6] T. Karkoszka, M. Roszak, Quality and environmental aspects in the technological process management, Proceedings of the Polish Conference „Projecting and Managing of the realization of the production. Chosen subjects”, Zielona Góra, 2005, 63-68.
• [7] T. Karkoszka, D. Szewieczek, Analysis of the wire rod superficial processing based on the quality criterion, Journal of Achievements in Materials and Manufacturing Engineering 18 (2006) 443-446.
• [8] T. Karkoszka, D. Szewieczek, Risk of the processes in the aspect of quality, natural environment and occupational safety, Journal of Achievements in Materials and Manufacturing Engineering 20 (2007) 539-542.
• [9] B. Krupińska, D. Szewieczek, Analysis of technological process on the basis of efficiency criterion, Journal of Achievements in Materials and Manufacturing Engineering 17 (2006) 421-424.
• [10] P. Lowe, H. Chapman, The Management of Technology. Perception and opportunities, Chapman and Hall, London, 1995.
• [11] J. Michalska, Quality costs in the production process, Journal of Achievements in Materials and Manufacturing Engineering 17 (2006) 425-428.
• [12] M. Roszak, St. Tkaczyk, Chosen aspects of evaluation of productive processes on the example of productive chains of sections type V29, Proceedings of the 13th International Scientific Conference „Achievements in Mechanical and Manufacturing Engineering” AMME'2005, Gliwice-Wisła, 2005, 556-558.
• [13] Z. Steininger, Steel wires processing. Chosen aspects, Silesia Publication, Katowice, 1975.
• [14] Z. Steininger, F. Grossman, Basis of the steel wires processing, Silesian Technical University Publication, Gliwice, 1998.
• [15] D. Szewieczek, T. Karkoszka, The analysis of a technological process based on quality and environmental criterion, Proceedings of the 13th International Scientific Conference „Achievements in Mechanical and Manufacturing Engineering” AMME'2005, Gliwice-Wisła, 2005, 285-288.
• [16] St. Tkaczyk, T. Karkoszka, Integration of the management systems based on the quality criterion in technological processes, Proceedings of the International Conference "Integrated Management System-quality, environment, safety, technology”, Szczyrk, 2001, 373-379.
• [17] St. Tkaczyk, T. Karkoszka, Superficial processing in the aspect of integrated management systems, Proceedings of the International Conference "Integrated Management Systems-quality", environment, safety, technology, Szczyrk, 2002, 461-469.
• [18] PN-EN ISO 9000 Quality management systems. Fundamentals and vocabulary, PKN, 2001.
• [19] PN-EN ISO 9001 Quality management systems. Requirements, PKN, Warszawa, 2001.
• [20] PN-EN 10016:1999 Non-alloy steel rod for drawing and/or cold rolling. General requirements, PKN, Warszawa, 1999.
• [21] PN-EN ISO 14001 Environmental management systems. Specification with guidance for use, PKN, Warszawa, 2005.
• [22] Prototypical fluid-stream cleaner, RP pattern P.272130, device usage exclusivity due to the pattern regulations.