The external refractive index dependence on coupling coefficient in the biconically fused single-mode fiber couplers

• Autorzy: Sawicki, Ł. , Jędrzejewski, K.
• Języki publikacji: EN

Abstrakty

EN

The coupling coefficient of fused biconical taper single-mode coupler can vary from 0% to almost 100% by changing the refractive index of the surrounding media. From the data obtained the coupling mechanism cannot be attributed to power transfer between the modal fields guided by the fiber cores in the taper waist region. The results support the model of the coupling mechanism between modes guided by a glass core and an external refractive index.

Słowa kluczowe

PL

czujniki; sprzęgacz; przewężka światłowodowa

EN

biconical fused tapers; couplers; sensors

• Czasopismo: Electronics and Telecommunications Quarterly
• Rocznik: 2008
• Tom: Vol. 54, No 3
• Strony: 311-321
• Opis fizyczny: Bibliogr. 17 poz., wykr.

Twórcy

autor

Sawicki, Ł.

autor

Jędrzejewski, K.

• Institute of Electronic Systems, Warsaw University of Technology,Nowowiejska 15/19, 00-665 Warszawa, Poland,

Bibliografia

• 1. B. S. Kawasaki, K. O. Hill, R. G. Lamont: Biconical-Taper Single-Mode Fiber Coupler. Optics Letters, 1981, Vol. 6, p. 327.
• 2. B. S. Kawasaki,, M. Kawachi, K. O. Hill, D. C. Johnson: A Single-Mode-Fiber Coupler With A Variable Coupling Ratio. IEEE/OSA : J. Lightwave Technol., 1983, Vol. LT1, p. 176.
• 3. K. Jędrzejewski: Biconical Fused Taper - A Universal Fibre Devices Technology. Opto-Electronics Review, 2000, Vol. 8, pp. 153/159.
• 4. R. A. Bergh, G. Kotler, H. J. Shaw: Single-Mode Fibre Optic Directional Coupler. Electronics Letters, 1980, Vol. 16, pp. 260-261.
• 5. M. J. Digonnet, B. Y. Kim: Single-Mode Fibre-Optic Components. J. IEEE, 1988, Vol. 58(5), p. S66-S78.
• 6. M. H. Slonecker, J. C. Williams: Recent Advances In Single-Mode Fused Taper Coupler Technology. Proc. Soc. Photo-Opt. Instrum. Eng., 1983, Vol. 412, p. 50.
• 7. T. Brichero, A. Fielding: Stable Low-Loss Single-Mode Couplers. Electronics Letters, 1984, Vol. 20, p. 230.
• 8. K. O. Hill, D. C. Johnson, R. C. Lamont: Efficient Coupling-Ratio Control In Single-Mode-Fiber Biconical-Taper Couplers. Washington : in Technical Digest, Conference on Optical Fiber Communication, Optical Society of America, 1984, paper WE2.
• 9. J. Bures, S. Lacroix, J. Lapierre: Analyse d'un Coupleur Bidirectione A Fibres Optiques Monomodes Fusionnees. Applied Optics: s.n., 1983, Vol. 22, p. 1918.
• 10. J. Bures, S. Lacroix, J. Lapierre: Some Particular Properties Of Monomode Fused Fiber Couplers. Applied Optics, 1984, Vol. 23, p. 968.
• 11. W. J. Stewart, J. D. Love: Design Limitations On Tapers And Couplers In Single-Mode Fibres. IOOC/ECOC Techn. Digest, 1985, Vol. 1, pp. 559-562.
• 12. J. D. Love, A. Ankiewicz: Cutoff In Single-Mode Optical Fibre Couplers. Electronics Letters, 1984, Vol. 20, p. 362.
• 13. R. G. Lamont, D. C. Johnson, K. O. Hill: Power Transfer In Fused Biconical-Taper Single-Mode Fiber Couplers: Dependence On External Refractive Index. Applied Optics, 1985, Vol. 24, No. 3, pp. 327-332
• 14. Cargille Laboratories: Cargille Standard Series Liquids - Cauchy Equations.
• 15. Współczynniki załamania szkła kwarcowego w temp. 24°C. Wikibooks. Wikipedia. http://pl.wikibooks.org/wiki/Aneks/WspC3%B3%C5%82czynniki_za%C5%82amania.
• 16. M. Szustakowski: Elementy Techniki Swiatłowodowej (in Polish). WNT, Warszawa, 1992.
• 17. Praca zbiorowa pod redakcją Jerzego Helsztyńskiego: Laboratorium podstaw optoelektroiki i miernictwa optoelektronicznego (in Polish). Oficyna WPW, Warszawa 2003.