Rotating Machines Parts and their Vibration Control

• Autorzy: Kopecký, M. , Cúth, V. , Vavro, J.
• Konferencja: International Conference on Modelling in Mechatronics (9 ; 02-04.09.2004 ; Kazimierz Dolny, Poland)
• Języki publikacji: EN

Abstrakty

EN

The development of new aggregates of mobile machine aims at the reduction of production and operational costs and, at the same time, at the increase of transmitted power when a sufficient reliability is provided. Simultaneously, the real operational safety concerning maximum permissible stress is also rescued. This results in necessity of further more exact methods of design and strength control of aggregate elements. The use of vibration data from rotating machinery to determine machine health has a long history. A practical example of gearbox vibration frequency analysis is presented, which demonstrates the use of high-resolution frequency controls using zoom FFT for diagnostic purposes. It is intended to show how to get and interpret good results from controls, with particular reference to points, which arise in gearbox applications.

Słowa kluczowe

EN

gearbox; vibration; mechanical loading; deflection

• Czasopismo: Machine Dynamics Problems
• Rocznik: 2004
• Tom: Vol. 28, No. 3
• Strony: 171-176
• Opis fizyczny: Bibliogr. 7 poz.

Twórcy

autor

Kopecký, M.

• A.D. University of Trenčín, Faculty of Industrial Technologies in Puchov, Slovakia,

autor

Cúth, V.

• A.D. University of Trenčín, Faculty of Industrial Technologies in Puchov, Slovakia

autor

Vavro, J.

• A.D. University of Trenčín, Faculty of Industrial Technologies in Puchov, Slovakia

Bibliografia

• [1] Kopecky, M., Vavro, J., 1989, Analysis techniques for gearbox diagnosis, Dynamics in Machine Journal, Acad. Bratislava, Slovakia.
• [2] Kopecky, M., 1993, Life assessment of some load - carrying machine components for transportation, Structural Safety, Elvesier Science Publishers, The Netherlands, 12, 145-149.
• [3] Cuth, V., 1981, Thermal loading of the exhaust valves at the variation operating mode of diesel engine, Inter. Symposium Science and Motor Vehicle, Kragujevac, Yugoslavia.
• [4] Randall, R.B., 1981, A new method of modelling gear faults, ASME Conf., Hartford Conn., USA.
• [5] Sága, M., 1998, Contribution to Dynamie Strength Dimension of Railway Vehicles Frames, Communications on the Edge of the Millenniums, 10fh International Scientific Conference, Žilina, Slovakia, 153-156.
• [6] Vavro, J., 1992, Lifting mechanism in theory and practice, DT Žilina, Slovakia.
• [7] Weibull, W., 1951, A statistical distribution functions of wide applicability, Journal of App. Mech., No 3.