Three methods for photon migration measurements in pulp

• Autorzy: Saarela, J. , Tormanen, M. , Myllyla, R.
• Języki publikacji: EN

Abstrakty

EN

This paper gives an overview of three promising optical techniques for conducting laser pulses time-of-flight measurements in pulp. The oscilloscope method and time-of-flight lidar method are especially good for fast in-line measurements while a streak camera is superior in the laboratory.

Słowa kluczowe

EN

time-of-flight; lidar; streak camera; oscilloscope; pulp measurements

• Czasopismo: Opto-Electronics Review
• Rocznik: 2004
• Tom: Vol. 12, No. 2
• Strony: 193-197
• Opis fizyczny: Bibliogr. 6 poz., rys., wykr.

Twórcy

autor

Saarela, J.

• University of Oulu, Measurement and Sensor Laboratory and Infotech Oulu, Technology Park 127, 874000 Kajaani, Finland,

autor

Tormanen, M.

• University of Oulu, Measurement and Sensor Laboratory and Infotech Oulu, Technology Park 127, 874000 Kajaani, Finland

autor

Myllyla, R.

• University of Oulu, Optoelectronics and Measurement Technology Laboratory and Infotech Oulu, PO BOX 4500, 90014 University of Oulu, Finland

Bibliografia

• 1. A. Karppinen, A. Kilpelä, M. Karras, J. Tornberg, and R. Myllylä, J. Pulp Paper Sci. 21, 151–154 (1995).
• 2. J. Saarela, M. Törmänen, and R. Myllylä, Proc. SPIE 4242, 156–63 (2001).
• 3. J. Saarela, M. Törmänen, and R. Myllylä, Proc. SPIE 5059, 58–65 (2003).
• 4. J. Saarela, M. Törmänen, and R. Myllylä, Meas. Sci. Tech. 14, 1801–1806 (2003).
• 5. M.C. Amann, T. Bosch, M. Lescure, R. Myllylä, and M. Rioux, Opt. Eng. 40, 10–19 (2001).
• 6. Hamamatsu, Guide to Streak Cameras, Cat. No. SSCS1035E02, Japan, 4–5 (1996).