Czasopismo
2000
|
Vol. 8, No. 4
|
299-306
Tytuł artykułu
Autorzy
Wybrane pełne teksty z tego czasopisma
Warianty tytułu
Konferencja
The E-MRS European Conference on Photovoltaics ; ( 25.10-27.10.1999)
Języki publikacji
Abstrakty
This paper reports on the results of several years of investigations aiming at simplification and efficiency improvement of a low cost screen printing solar cell process. All solar cell process operations, materials and equipment have been, with this respect, critically examined, re - optimised and, if necessary, removed or replaced. A simple industrial type process for high efficiency multicrystalline and monocrystalline solar cells has been developed. The process sequence is based on screen printed contacts fired through a PECVD SiNx antireflection coating layer. The total number of processing steps has been reduced to six. All processing steps can be easily transferred into big volume roduction lines. Solar cells with average cell efficiency above 15% and 17% were respectively obtained on large area multicrystalline and monocrystalline substrates. Including in the processing sequence the advanced processes of isotropic texturisation and selective emitter increases the cell efficiency to 16.9% and 17.9% respectively for multi- and and monocrystalline silicon. A new cell concept, metallisation wrap through cell (MWT), has been recently introduced. The cell efficiency of 13.1% has been obtained in a simple cell processing sequence based on screen printed contacts.
Słowa kluczowe
Czasopismo
Rocznik
Tom
Strony
299-306
Opis fizyczny
Bibliogr. 20 poz.
Twórcy
autor
autor
autor
autor
autor
autor
autor
autor
- Interuniversity Microelectronics Centre (IMEC), 75 Kapeldreef, B-3001 Leuven, Belgium, szlufcik@imec.be
Bibliografia
Typ dokumentu
Bibliografia
Identyfikatory
Identyfikator YADDA
bwmeta1.element.baztech-article-BWA1-0001-1004