Achievements of the Institute of Manufactur Engineering, in the Field of Machine Dynamics

• Autorzy: Bodnar, A. , Marchelek, K.
• Języki publikacji: EN

Abstrakty

EN

Selected achievements of the Institute of Manufacturing Engineering in the field of machine tool dynamics are presented. In the first part of the paper the structure of the institute is described. In the main part, the analysis of problems concerning modeling of machine guideways, a method of searching for weak points in the machine tool construction and chatter damping are analysed. The method of modeling guideways, developed in the Institute, is based on original external loads correction concept. The weak points detection method can be applied when modeling a machine tool, at the design stage, or after the experimental examination of the machine. The former employs the sensitivity analysis, the latter includes a study of the influence of machine tool subassemblies relative vibration on the dynamic displacement of the tool relative to the workpiece. Chatter monitoring is based on measurements of generated noise and vibration. Different methods of signal processing were tested, including STFT, WT and Prony's decomposition. The major problem here is the determination of limit values for the analyzed chatter symptoms. Directions of future investigations are sketched.

Słowa kluczowe

EN

machine tools; guideways; weak points; chatter detection; vibration damping

• Czasopismo: Machine Dynamics Problems
• Rocznik: 2009
• Tom: Vol. 33, No. 1
• Strony: 5-15
• Opis fizyczny: Bibliogr., 12 poz., il., wykr.

Twórcy

autor

Bodnar, A.

autor

Marchelek, K.

• Westpomeranian University of Technology in Szczecin,

Bibliografia

• Berczyński, S., Gutowski, P., 2006, Identification of the Dynamic Models of Machine Tool Supporting Systems, Part I: An Algorithm of the Method, Part II: An Example of Application of the Method, Journal of Vibration and Control, 3, 257-277, 279-295.
• Bodnar, A., 2006, Choosing Locations of Sensors for Chatter Vibration Monitoring, Advances in Manufacturing Science and Technology, 3, 65-78.
• Bodnar, A., Marchelek, K., 2006, Diagnosing of Self-Excited Vibrations in the Machine Tool - Cutting Process Systems, Vibrations in Physical Systems, Poznań, 22, 11-22.
• Domek, S., Parus, A., Pietrusewicz, K., 2006, Model Based Chatter Suppression in Machining, Advances in Manufacturing Science and Technology, 4, 5-18.
• Dhupia, J.S., Powałka, B., Ulsoy, A.G., Katz, R., 2007, Effect of a Nonlinear Joint on the Dynamic Performance of a Machine Tool, Journal of Manufacturing Science and Engineering, 129, 943-950.
• Dhupia, J.S., Ulsoy, A.G., Katz, R., Powałka, B., 2008, Experimental Identification of the Nonlinear Parameters of an Industrial Translational Guide for Machine Performance Evaluation, Journal of Vibration and Control, 14, 645-668.
• Jastrzębski, D., 2008, Application of the Hybrid Finite Element Method in Modeling of Static Properties of Machine Tools Load-Carrying Subsystems, Advances in Manufacturing Science and Technology, 2, 5-20.
• Jastrzębski, D., Pawełko, P., Skrodzewicz, J., Szwengier, G., 2007, Experimental Research on the Static Properties of Rolling Guideway Subassemblies, Advances in Manufacturing Science and Technology, 1, 5-18.
• Szwengier, G., Berczyński S., Goduński T., 2000, Identification of Physical Parameters in Contact Joints Models of Machines Supporting Systems, Advances in Engineering Software, 2, 149-155.
• Szwengier, G., Jastrzębski, D., Goduński, T., 1995, Modeling and Design Calculations of Machine Tools Slideway Systems, Proc. IX World Congress on the Theory of Machines and Mechanisms, Milano (Italy), 4, 2703-2707.
• Tönshoff, H.K., Denkena, B., Jacobsen, J., Heimann, B., Schütte, O., Grudziński, K., Bodnar, A., 2004, Nonlinear Dynamics of an External Cylindrical Grinding System and a Strategy for Chatter Compensation, In: Dynamics of Production Systems. Red. G. Radons and E. Neugebauer, Wiley-VCH, Weinheim, 187-207.
• Włodarski, M., Bodnar, A., 2004, Application of Discrete Wavelet Transform in Vibration Monitoring of Machine Tools, 6-th International Conference on "Unconventional Electromechanical and Electrical Systems", Alushta, Ukraine, 877-882.