Cavitation phenomena in the injection nozzle: theoretical and numerical analysis

• Autorzy: Volmajer, M. , Kegl, B.
• Języki publikacji: EN

Słowa kluczowe

EN

two-phase flow; cavitation

• Czasopismo: Journal of KONES
• Rocznik: 2004
• Tom: Vol. 11, No. 3-4
• Strony: 295-303
• Opis fizyczny: Bibliogr. 21 poz., rys.

Twórcy

autor

Volmajer, M.

• Universiy of Maribor, Faculty of Mechnical Engineering, Smetanova ulica 17, SI 2000 Maribor, Slovenia, Phone : [phone], fax: + 386 2 220 79 90,

autor

Kegl, B.,

Bibliografia

• [1] C.Arcoumanis et. al., Visualisation of cavitation in diesel engine injectors, Mec.Ind. (2001)2,375-381
• [2] C.Arcoumanis et.al., Investigation of cavitation in a vertical multi-hole injector, SAE paper 1999-01-0524
• [3] C.Arcoumanis et.al, Cavitation in real-size multi-hole diesel injector nozzles, SAE paper 2000-01-1249
• [4] C.Badock et.al, Investigation of cavitation in real size diesel injection nozzle, International Journal of Heat and Fluid Flow 20 (1999)
• [5] C.Baumgarten et.al., Numerical and experimental investigations of cavitating flow in high pressure diesel nozzles, ILASS-Europe 2001, Zurich
• [6] E.v.Berg et.al.. Validation of a CFD model for coupled simulation of nozzle flow, primary fuel jet break-up and spray formation, ICES2003-643, 2003 Spring Technical Conference of the ASME Internal Combustion engine Division, Salzburg, 2003
• [7] FIRE Version 8 - Users manual, Multiphase flow, AVL, 2003
• [8] L.C.Ganippa et.al., The structure of cavitation and its effect on the spray pattern in a single hole diesel nozzle, SAE paper 2001-01-2008
• [9] L.C.Ganippa et.al.,Comparison of cavitation phenomena in transparent scaled-up single
• hole diesel nozzles, 4th international symposium on cavitation, California institute of technology, Pasadena, 2001
• [10] B.Göschel, Einspritzdüsenverschleiß, Forschungverinigung Verbrenungskraftmachinen e.V.. Heft R245, 1974
• [11] K.Jung et.al., The breakup characteristics of liquid sheets formed by like-doublet injectors, Journal of Propulsion and Power (sent), http://rpl.snu.ac.kr/
• [12] Kavitation. Abschlüßberichttüber die Ergebnise des Schweipunktprogramm 1966-1972, Deutsche Forschungsgemeinschafts, Boppard, 1974
• [13] G.König et.al., Analysis of flow and cavitation Phenomena in diesel injection nozzles and its effects on spray and mixture formation, 5.Internationales Symposium für Verbrennungsdiagnostik der AVL Deutschland, 6.-7.Juni 2002, Baden Baden, 2002
• [14] Y.Laoonual et.al., Internal fluid flow and spray visualization for a large scale valve covered orifice (VCO) injector nozzle, ILASS-Europe 2001, Zurich, 2-6 September, 2001
• [15] K.Melcher, I.Komaroff, Experimentelle Utersuchung der Stroemung durch Dieseleinspritzduesen in stationaer betriebenen Grossmodel, Bosch Techn. Berichte 5 (1976)4
• [16] W.H.Nurrick, Orifice cavitation and its effects on spray mixing, Journal of fluids Engineering, 98 (1976)
• [17] R.Payri, et.al., The influence of cavitation on the internal flow and the spray characteristics in diesel injection nozzles, FUEL 83 (2004)
• [18] J.Sauer, Instationaer kavitirende Stroemungen - Ein neues Modell, basierend auf Front Capturing (VoF) und Blasendynamik, PhD Thesis, Unversitaet Karlsruhe, Karlsruhe, 2000
• [19] D.P.Schmidt et.al., Analyitical prediction of the exit flow of the cavitating flow, Atom, and sprays, 6 (1997)
• [20] C.Soteriou et.al., Through the diesel nozzle hole-a journey of discovery II, ILASS- Europe 2001, Zurich
• [21] E.Winklhofer et.al, Basic flow processes in high pressure fuel injection equipment, Proceedings of the 9th International conference on liquid atomization and spray systems, ICLASS-2003, Sorento, Italy, July (2003)