Investigations of Polyaniline Thin Films as a Toxic Gas Sensors in Saw and Electric System - Preliminary Results

• Autorzy: Urbańczyk, M. , Jakubik, W. , Maciak, W. , Stolarczyk, A.
• Języki publikacji: EN

Abstrakty

EN

Presented here are the preliminary results concerning a polyaniline thin films investigations in a Surface Acoustic Wave dual-delay line and electric systems. The polyaniline films has been prepared by an open-boat, physical vapor deposition (PVD) process using chemically prepared polyaniline powder as starting material. These films were simultaneously formed in a one of the SAW dual delay lines and on the interdigital electrodes of the glass substrate for electric resistance measurements. The thickness of the polyaniline films was about 100 nm. These polyaniline films have been investigated from the point of view their sensitivity towards: nitrogen dioxide, sulphur dioxide, ammonia, H2S, carbon monoxide and hydrogen gases with different concentrations in dry air. Preliminary measurements of this two polyaniline films have been performed simultaneously in the same chamber for this same measurement conditions using an acoustic and electric methods.

Słowa kluczowe

EN

polyaniline film; surface acoustic wave; electric method

• Czasopismo: Molecular and Quantum Acoustics
• Rocznik: 2004
• Tom: Vol. 25
• Strony: 235-242
• Opis fizyczny: Bibliogr. 16 poz., rys.

Twórcy

autor

Urbańczyk, M.

• Institute of Physics, Silesian University of Technology ul.Krzywoustego 2, 44-100 Gliwice, Poland,

autor

Jakubik, W.

• Institute of Physics, Silesian University of Technology ul.Krzywoustego 2, 44-100 Gliwice, Poland

autor

Maciak, W.

• Institute of Physics, Silesian University of Technology ul.Krzywoustego 2, 44-100 Gliwice, Poland

autor

Stolarczyk, A.

• Department of Physical Chemistry and Polymer Technology, Silesian University of Technology, Gliwice, POLAND

Bibliografia

• 1. N.Li, Y.Lee and L.H.Ong, J.Appl.Electrochem. 22, 512 (1992).
• 2. F. Trinidad, M.C.Montemayer and E.Fatas, J.Electrochem.Soc. 138, 3186 (1991).
• 3. P.R. Teasdale and G.G. Wallace, Analyst, 118, 329 (1993).
• 4. P.N Bartlett and S.K.I Chung, Sensors and Actuators, 20,287 (1989).
• 5. E.W.Paul, A.J.Ricco and M.S.Wrighton, J.Phys.Chem,, 89,1441 (1985).
• 6. S .K. Dhawan and D .C. Trivedi, Poly. Inter. ,25,55(1991).
• 7. A.Boyle, E.M. Genies and M.Lapkowski, Synth. Met. 28, C769 (1989).
• 8. H.Hu, M.Trejo, M.E. Nicho, J.M.Saniger and A.Garcia-Valenzuela, Sensors and Actuators B 82, 14 (2002).
• 9. R.V.Plank, Y.Wei, N.J. DiNardo and J.M.Vohs Chem. Phys. Letters 263, 33 (1996).
• 10. T.R.Dilingham, D.M.Comelison and E.Bullock, J.Vac. Sci.Technol. A 12(4), 2436 (1994).
• 11. P.Dannetum and K.Uvdai, Chemtronics, 5, 173 (1991).
• 12. W. Jakubik, M. Urbańczyk, Journal of Technical Physics, 38, 3, 589(1997).
• 13. M.Urbańczyk, W.Jakubik, Electron Technology, 33,1/2,161, Warszawa (2000).
• 14. W. Jakubik, M.Urbańczyk, S.Kochowski, J.Bodzenta, Sensors and Actuators B 82, 265, (2002).
• 15. W.Jakubik, M.Urbańczyk, S.Kochowski, J.Bodzenta Sensors and Actuators, B, 96, 321,(2003).
• 16. L.Ding, X.Wang, R.V.Gregory, Synth.Me. 104, 73 (1999).