Pspice model for simulating the giant magnetoimpedance effect in magnetic amorphous wires

• Autorzy: Fosalau, C. , Damian, C. , Zeta, C.
• Języki publikacji: EN

Abstrakty

EN

The paper presents an electrical model developed for Pspice simulation of the behavior of the magnetic amorphous wires (MAW) working under the Giant Magnetoimpedance (GMI) effect. The model was developed in order to facilitate the design of the signal conditioning circuitry belonging to the new category of transducers whose sensitive element is based on the GMI effect. The model is a complex one, owing to the fact that the effect is influenced by many internal or external factors, whose actions have to be taken into consideration. In the paper, an example on how the model can be applied to simulate a Colpitts oscillator is given next to its presentation and analysis.

Słowa kluczowe

EN

amorphous wire; giant magneto-impedance effect; PSpice model; magnetic sensor

• Czasopismo: Metrology and Measurement Systems
• Rocznik: 2009
• Tom: Vol. 16, nr 1
• Strony: 171-182
• Opis fizyczny: Bibliogr. 18 poz., rys., tab., wykr.

Twórcy

autor

Fosalau, C.

autor

Damian, C.

autor

Zeta, C.

• "Gh.Asachi" Technical University of Iasi, Faculty of Electrical Engineering, Bd. D.Mangeron 53, Iasi, 700050, Romania,

Bibliografia

• [1] P.T. Squire, D. Atkinson, M.R. Gibbs: “Amorphous wires and their applications””. J. of Magn. & Magn. Mat., 132, 1994, pp. 10-21.
• [2] L.V. Panina, K. Mohri, T. Uchiyama, M. Noda: “Giant Magneto-Impedance in Co-Rich Amorphous Wires and Films”. IEEE Trans. Magn., vol. 31, 1995, pp. 1249-1260.
• [3] K. Mohri et al: “Magneto-Impedance Element”. IEEE Trans. Magn., vol. 31, 1995, pp. 2455-2466.
• [4] H. Chiriac, E. Hristoforou, M. Neagu, F. Borza: “Force measurements using Fe-rich amorphous wire as magnetostrictive delay line”. Sensors & Actuators, vol. A91, June 2001, pp. 223-225.
• [5] E. Hristoforou: “Magnetostrictive delay lines and their applications”. Sensors & Actuators A: Phys, vol. 59, 1997, pp. 183-191.
• [6] H. Chiriac, E. Hristoforou, M. Neagu, I. Darie, T.A. Ovari: “Amorphous wire delay lines used for magnetic field measurement”. IEEE Trans. Magn., vol. 33, 1997, pp. 4041-4043.
• [7] K. Mohri, T. Kondo, H. Sugino: “Non-contact linear displacement sensors using amorphous-core multivibrators for mechanocardiography”. IEEE Trans. Magn., vol. MAG-21, Sept. 1985, pp. 2071-2073.
• [8] L.P. Shen, K. Mohri: “Mechano-encephalogram based on amorphous wire micro SI aceeleration sensor”. IEEE Trans. Magn., vol. 37, July 2001, pp. 2007-2009.
• [9] C. Fosalau, M. Cretu, O. Postolache: “A Circular Displacement Sensor Using Magnetostrictive Amorphous Wires”. IEEE Trans. Magn., vol. 36, May 2000, 557-560.
• [10] L.P. Shen, K. Mohri, T. Uchiyama, Y. Honkura: “Sensitive acceleration sensor using amorphous wire SI element combined with CMOS IC multivibrator for environmental sensing”. IEEE Trans. Magn., vol. 36, Sept. 2000, pp. 3667-3669.
• [11] K. Inada, K. Mohri, K. Inuzuka: “Quick Response Large Current Sensor Using Amorphous MI Element Resonant Multivibrator”. IEEE Trans. Magn., vol. 30, Nov. 1994, pp. 4623-4625.
• [12] Y. Yoshida, A. Tayaoka: “Precise Current Sensor by means of Small-Angle Magnetization Rotation using Amorphous Wire and its Industrial Application”. IEEE Trans. Magn., vol. 29, Nov. 1993, pp. 3180-3182.
• [13] V. Lemarquand: “Synthesis Study of Magnetic Torque Sensors”. IEEE Trans. Magn., vol. 35, Nov. 1999, pp. 4503-4510.
• [14] K. Bushida, Mohri: “Sensitive micro-inductive effect in amorphous wires using high-pass filter and micro field sensor”. IEEE Trans. Magn., vol. 30, Nov. 1994, pp. 4626-4628.
• [15] K. Bushida, K. Mohri, T. Kanno: “Amorphous wire MI micro magnetic sensor for gradient field detection”. IEEE Trans. Magn., vol. 32, Sept. 1996, pp. 4944-4946.
• [16] C. Fosalau, M. Cretu, L. Nita: “A novel angle transducer using amorphous materials”. Mecatronica, no. 2, 2004, pp. 34-37.
• [17] C. Zet, C. Fosalau, E. Vremera: “A new magnetic field transducer based on magneto-impedance amorphous wires”. Buletinul Institutului Politehnic din Iasi (Bulletin of Polytechnic Institute of Iasi), tome LII, 2006, pp. 67-77.
• [18] C. Fosalau, M. Temneanu, C. Donciu, C. Zet: “A low frequency current transducer with frequency output based on GMI effect in amorphous wires”. 4th International Workshop on Amorphous and Nanostructured Magnetic Materials, Iasi, August 29-31, 2007, pp. 34-39.