Surface integrity functional analysis in hard turning AISI 8620 case hardened steel through 3D topographical measurement

• Autorzy: Farias, A. , Delijaicov, S. , Batalha, G.
• Języki publikacji: EN

Abstrakty

EN

Purpose: This work aims investigate the resulting machined surface condition from hard turning process of mechanical components manufactured from case hardened steel. Design/methodology/approach: The surface was examined by parameters obtained from the three-dimensional surface topography obtained with an interferometric laser instrument. Findings: The selected roughness parameters analysis intends to have a functional characterization such as bearing capacity, fluid and lubricants retention ability and contact wear resistance. Research limitations/implications: The obtained results were validated against similar ones, showing that the employed measuring techniques and analyses were correctly conducted. Practical implications: The functional bearing area curve analysis parameters indicates that the resulting surface has a good area contact, good bearing capacity and reasonable ability to fluid retention as the reduced valley depth parameter Svk not produced higher values for all conditions tested. Originality/value: The obtained results in the surface roughness measurement shows consistency with other authors results, and it shows that the technique of hardened material turning is capable of producing surfaces with functionality and quality.

Słowa kluczowe

PL

obróbka; toczenie na twardo; topografia 3D; chropowatość; utwardzanie powierzchniowe; AISI 8620; jakość powierzchni

EN

machining; hard turning; 3D topography; roughness; case hardening; AISI 8620; surface integrity

• Czasopismo: Archives of Materials Science and Engineering
• Rocznik: 2010
• Tom: Vol. 46, nr 1
• Strony: 47-52
• Opis fizyczny: Bibliogr. 8 poz.

Twórcy

autor

Farias, A.

autor

Delijaicov, S.

autor

Batalha, G.

• Laboratory of Manufacturing Engineering, Department of Mechatronics and Mechanical Systems Engineering, University of Sao Paulo - Escola Politecnica, Av. Prof. Mello Moraes, 2231, Cidade Universitária, CEP 05508900 - Sao Paulo, SP - Brazil,

Bibliografia

• [1] J. Rech, H. Hamdi, S. Valette, Workpiece Surface Integriy, Chapter from Machining Fundamentals and recent Advances, J.P. Davim editor, Springer-Verlag, London, 2008.
• [2] K.J. Stout, P.J. Sullivan, W.P. Dong, E. Mainsah, N. Luo, T. Mathia, H. Zahouani, The development of methods for the characterization of roughness in three dimensions, University of Birmingham, Inglaterra, University of Birmingham Press, 1993, 359.
• [3] B. Griffiths, Manufacturing Surface Technology, Penton Press, London, 2001, 233.
• [4] R.A. Waikar Y.B. Guo, A comprehensive characterization of 3D surface topography induced by hard turning versus grinding, Journal of Materials Processing Technology 197/1-3 (2008) 189-199.
• [5] H.K. Tönshoff, C. Arendt, R. Amor, Cutting of hardened steel, CIRP Annals 49/2 (2000) 547-66.
• [6] W. Grzesik, J. Rech, T. Wanat, Surface finish on hardened bearing steel parts produced by super hard and abrasive tools, International Journal of Machine Tools and Manufacture 47/2 (2007) 255-262.
• [7] H. Akima, A method of bivariate interpolation and smooth surface fitting for irregularly distributed data points, ACM Transactions on Mathematical Software 2 (1978) 148-159.
• [8] G.F. Batalha, M. Stipkovic Filho, Quantitative Characterization of the Surface topography of cold rolled sheets - new approaches and possibilities, Journal of Materials Processing Technology 113/1 (2001) 732-738.