Warianty tytułu
Języki publikacji
Abstrakty
Purpose: The objective of this study is to utilise and evaluate the mechanical properties of the chicken feather quill and fibre reinforced vinylester and polyester composites. Design/methodology/approach: Prior to production of the composites, the chicken feather fibres (CFF) were cleaned, tested and analyzed in terms of physical properties; linear density and tensile behaviour. The unidirectional CFF reinforced composites were produced with vinylester and polyester resins with three fibre reinforcement loadings (2.5, 6, 10wt%). Following experiments were conducted to determine physical properties of the control (0%) and CFF reinforced composites; tensile, flexural and Charpy impact testing. Findings: It was found that the impact properties of the CFF reinforced composites are significantly better than the control composites however both the tensile and the flexural properties of the CFF reinforced composites have poorer values compared to the control composites. For the 10% CFF reinforced vinylester composite, Charpy impact value was 4.42 kgj/mm2 which was 25% higher than the control vinylester composites (3.31 kgj/mm2) and also for the 10% CFF reinforced polyester (4.56 kgj/mm2) composite had three times better impact resistance than the control composite (1.85 kgj/mm2). Practical implications: The CFF reinforced composite have potential applications due to its improved impact behaviour. Originality/value: If the poultry waste can be utilised and used any engineering applications they will be preferred due to low-cost and superior characteristics and the most importantly they will not cause ecological and health problems.
Rocznik
Tom
Strony
82-86
Opis fizyczny
Bibliogr. 11 poz.
Twórcy
autor
autor
autor
autor
autor
autor
- Institute for Materials Research and Innovation, The University of Bolton, Deane Road, Bolton, BL3 5AB, UK, m.uzun@marmara.edu.tr
Bibliografia
- [1] L.T. Drzal, M.J. Rich, P.F. Lloyd, Adhesion of graphite fibers to epoxy matrices. Part 1. The role of fibre surface treatment, Journal of Adhesion 16/1 (1983) 1-30.
- [2] M. Hsie, C. Tu, P.S. Song, Mechanical properties of poly propylene hybryd fiber-reinforced concrete, Materiale Science and Engineering A 494 (2008) 153-157.
- [3] S. Shibata, Y. Cao, I. Fukumoto, Lightweight laminate composites made from kenaf and polypropylene fibres, Polymer Testing 25/2 (2006) 142-148.
- [4] J.R. Barone, W.F. Schmidt, F.E. Liebner, Compounding and molding of polyethylene composites reinforced with keratin feather fiber, Composites Science and Technology 65 (2005) 683-692.
- [5] T.A. Bullions, D. Hoffman, R.A. Gillespie, J.P. O’Brien, A.C. Loos, Contributions of feather fibres and various cellulose fibres to the mechanical properties of polypropylene matrix com-posites, Composite Science and Technology 66 (2006) 102-114.
- [6] S. Huda, Y. Yang, Composites from ground chicken quill and polypropylene, Composites Science and Technology 68 (2008) 790-798.
- [7] N. Reddy, Y. Yang, Structure and properties of chicken feather barbs as natural protein fibres, Journal of Polymers and The Environment 15/2 (2007) 81-87.
- [8] A.L. Martinez-Hernandez, C. Velasco-Santos, M. de-Icaza, V.M. Castano, Dynamical-mechanical and thermal analysis of polymeric composites reinforced with keratin biofibers from chicken feathers, Composites B 38/3 (2007) 405-410.
- [9] ASTM 1997d Standard practice for conditioning textiles for testing. (D-1776-90). American Society for Testing and Materials, West Conshohocken, PA, 483-446.
- [10] ASTM D1577: Linear density of textile fibres, American Society for Testing and Materials.
- [11] ASTM D3822: Tensile properties of single textile fibre, American Society for Testing and Materials.
Typ dokumentu
Bibliografia
Identyfikatory
Identyfikator YADDA
bwmeta1.element.baztech-article-BSL4-0013-0027