Wireless network for testing scaffoldings

• Autorzy: Misztela, A. , Pijawski, B. , Starczewski, Z.
• Języki publikacji: EN

Abstrakty

EN

This paper presents a prototype installation for testing scaffoldings with the use of a wireless sensor network. This installation made it possible to eliminate most of the time-consuming wiring, which has simplified and shortened the cycle of scaffolding research in the Laboratory of Temporary Structures, Institute of Mechanised Construction and Rock Mining. The wireless sensor was built in a star topology with three wireless modules (Nodes) around a single coordinator (Gateway). SureCross DX80 Banner Engineering (USA) system was used to build the modules.

Słowa kluczowe

PL

rusztowanie budowlane; czujnik ultradźwiękowy wyporowy; triangulacja laserowa; czujnik wyporowy

EN

wireless sensor network; construction scaffolding testing; ultrasonic displacement sensors; laser triangulation displacement sensors

• Czasopismo: International Journal of Applied Mechanics and Engineering
• Rocznik: 2012
• Tom: Vol. 17, no. 3
• Strony: 941-951
• Opis fizyczny: Bibliogr. 8 poz., rys., wykr.

Twórcy

autor

Misztela, A.

autor

Pijawski, B.

autor

Starczewski, Z.

• Institute of Mechanised Construction and Rock Mining Racjonalizacji 6/8, 02-673 Warsaw, POLAND,

Bibliografia

• Banner Engineering (2010): SureCross Wireless I/O Network Manual, Rev G 12/14_132607.
• Lynch J.P., Wang Y., Swartz R.A., Lu K.C. and Loh C.H. (2007): Implementation of a closed-loop structural control system using wireless sensor networks. - Dept. of Civil and Env. Engr., Stanford University, University of Michigan, Dept of Civil Engr, National Taiwan University.
• Misztela A. (2008): Criteria for evaluation of safety in terms of K/0812-72/1/08. System Scaffolding standing still working. - IMBiGS.
• Pijawski B. (2010): Wireless Sensor Networks in the industry - problems of functioning and the applicability. - TiAM Technology and Assembly Automation, No.1 (67).
• Pijawski B. (2011): Step 1. Design of test scaffolding using wireless data transmission. - statutory work No. 12927, IMBiGS.
• Pijawski B. (2011): Step 2. System to study scaffolding using wireless data transmission. - statutory work No. 13102, IMBiGS.
• Wang Y., Swartz R.A., Lynch J.P., Law K.H., Lu K.-C. and Loh C.-H. (2006): Application of Decentralized Wireless Sensing and Control in Civil Structures. - US-Taiwan Workshop on Smart Structural Technology for Seismic Hazard Mitigation, Taipei, Taiwan.
• Wang Y., Lynch J.P. and Law K.H. (2005): Wireless Structural Sensors using Reliable Communication Protocols for Data Acquisition and Interrogation. - Proc. of the 23rd Int. Modal Anal. Conf.