Numerical and experimental vibration analysis of domestic washing machine drum

• Autorzy: Buśkiewicz, J. , Pittner, G. , Barczewski, R.
• Języki publikacji: EN

Abstrakty

EN

The vibration of a drum of the washing machine Samsung WF0804 caused by the unbalanced mass attached to the rotating unit was examined. The motion equations of the washing machine drum were derived. The stand for experimental measurement was presented. The numerical results were compared with experimental measurements. General conclusions were mode. The analysis will make up the basis for experimental studies aimed at finding the most effective way of balancing drum vibrations.

Słowa kluczowe

PL

pralka; równanie ruchu; wibracja; analiza numeryczna

EN

washing machine; motion equations; vibration; numerical analysis; experimental analysis

• Czasopismo: International Journal of Applied Mechanics and Engineering
• Rocznik: 2012
• Tom: Vol. 17, no. 3
• Strony: 765-777
• Opis fizyczny: Bibliogr. 8 poz., rys., tab., wykr.

Twórcy

autor

Buśkiewicz, J.

autor

Pittner, G.

autor

Barczewski, R.

• Faculty of Mechanical Engineering and Management Poznan University of Technology ul. Piotrowo 3, 60-965 Poznan, POLAND,

Bibliografia

• Awrejcewicz J. (2012a): Classical Mechanics. Dynamics - New York: Springer.
• Awrejcewicz J. (2012b): Classical Mechanics. Statics and Kinematics - New York: Springer.
• Buśkiewicz J. and Pittner G. (2012): Dynamic model of the drum of the washing machine SAMSUNG WF0804. - XXV Symposium Vibrations in Physical Systems, Poznan - Będlewo, May 15-19, 2012 (in press).
• Conrad D.C. and Soedel W. (1995): On the problem of oscillatory walk of automatic washing machine.- Journal of Sound and Vibration, vol.188, No.3, pp.301-314.
• Kiray B., Tugcu A.K. and Sumer I.T. (1995): Formulation and implementation of parametric optimisation of a washing machine suspension system. - Mechanical Systems And Signal Processing, vol.9, No.4, pp.359-377.
• Lim Hee-Tea, Jeong Weui-Bong and Kim Keun Joo (2010): Dynamic modeling and analysis of drum-type washing machine. - International Journal of Precision Engineering and Manufacturing, vol.11, No3, pp.407-417.
• Nygĺrds T. and Berbyuk V. (2012): Multibody modeling and vibration dynamics analysis of washing machines. - Multibody System Dynamics, vol.27, pp.197-238.
• Papadopoulos E. and Papadimitriou I. (2001): Modeling, design and control of a portable washing machine during the spinning cycle. - National Technical University of Athens, IEEE/ASME AIM 2001, 8-11 July 2001, Como, Italy, pp.899-904.