Simulation of the movement of four-bar spatial linkage

• Autorzy: Budniak, Z. , Bil, T.
• Języki publikacji: EN

Abstrakty

EN

In this article, the use of the potential of CAD/CAE modern systems was presented for the modeling and kinematic analysis of the spatial four-bar linkage. The simulation model that was developed on the grounds of the methodology proposed, allowed numerical analyzes. The results of these analyses are presented in charts.

Słowa kluczowe

PL

analiza kinematyczna; trajektoria; symulacja

EN

spatial linkage; four-bar; kinematic analysis; collision in motion; position; trajectory; CAD/CAE

• Czasopismo: International Journal of Applied Mechanics and Engineering
• Rocznik: 2012
• Tom: Vol. 17, no. 3
• Strony: 723-732
• Opis fizyczny: Bibliogr. 5 poz., rys., wykr.

Twórcy

autor

Budniak, Z.

autor

Bil, T.

• Department of Mechanical Engineering Koszalin University of Technology Raclawicka 15-17, 75-620 Koszalin, POLAND,

Bibliografia

• Bil T. (2010): The Bennett linkage in the geometry of tori. - Acta Mechanica et Automatica, vol.4, No.1, pp.5(8, (in Pol.).
• Bil T. (2012a): Analysis of the Bennett linkage in the geometry of tori. - Mech. And Mach. Theory, vol.53, pp.122-127.
• Bil T. (2012b): New general model four-bar spatial linkage. - Int. J. of Appl. Mech. and Eng., vol.17, No.3, pp.677-687.
• Bil T. and Budniak Z. (2011): Problems of modeling and analysis of the four-bar spatial linkage. - Fundamentals of Machine Design - directions for research and development. Gdansk 2011, Tom 1, pp.92-100, (in Pol.).
• Kuang-Hua Chang (2010): Motion Simulation and Mechanism Design with SolidWorks Motion 2009. - Schroff Development Corporation, p. 134.