Czasopismo
2008
|
Vol. 8, iss. 4
|
177-180
Tytuł artykułu
Autorzy
Wybrane pełne teksty z tego czasopisma
Warianty tytułu
Języki publikacji
Abstrakty
The investigations of phase transformations described in this study were carried out on hypoeutectic alloys from the Al-Si system (AlSi3, AlSi6 and AlSi9) during heating and cooling. The determination and analysis of characteristic temperature values from the solidification range was made by the DSC method in calorimetric investigations carried out on a high-temperature multi HTC scanning calorimeter. Applying the lever rule, the phase composition of the examined silumins was calculated and compared with the results of DSC calorimetry, obtaining a good correlation of the results.
Czasopismo
Rocznik
Tom
Strony
177-180
Opis fizyczny
Bibliogr. 6 poz., fot., rys., tab.
Twórcy
autor
- Silesian University of Technology, Department of Alloys and Composites Engineering, Krasińskiego 8 St., 40-019 Katowice, Poland, jaroslaw.piatkowski@polsl.pl
Bibliografia
- [1] Z. Górny, J. Sobczak, Non-ferrous metals based novel materials in foundry practice. Cracov 2005 (in Polish).
- [2] J.F. Hu, E.N. Pan, Determination of latent heat and changes in solid fraction during solidification of Al-Si alloys by the CA-CCA method. Cast Metals Res. 1998 Vol. 10 No. 6, 307-319.
- [3] J.M. Kim, M.F. Zhu, C.P. Hong, Evolution of primary phase in solidification of Al-Si alloys. Cast Metals Res. 2002 Vol. 15 No. 3, 285-289 (in English).
- [4] F. Binczyk, R. Przeliorz, J. Bzymek, J. Kulasa, The apply of the scanning calorimetry to determination of melting and solidification enthalpy of phases alloys. Conference of Metallurgy PAN. Cracow 2006 (in Polish).
- [5] S. Pietrowski, Silumines. Ed. of the Lodz University of Technology, Łódź 2001 (in Polish).
- [6] J. Piątkowski, The dissertation scientific paper. Silesian University of Technology, Katowice, 2000 (in Polish).
Typ dokumentu
Bibliografia
Identyfikatory
Identyfikator YADDA
bwmeta1.element.baztech-article-BPZ3-0046-0033