Czasopismo
2007
|
Vol. 7, iss. 3
|
71-74
Tytuł artykułu
Autorzy
Wybrane pełne teksty z tego czasopisma
Warianty tytułu
Języki publikacji
Abstrakty
The aim of conducted research was to find universal steel that may serve to regenerate machine elements by MULTIPLEX method - or cladding of alloy steel and then subjecting to thermo-chemical treatment. This paper presents the results of metallographic examination, hardness distribution and selected tribological properties of vacuum carburized, sulphonitrided and vacuum nitrided layers obtained on 15HN steel. The results demonstrate that on 15HN steel (carburizing steel), nitrided and sulphonitrided layers show good durability and tribological properties. Therefore, it is possible to use it to regenerate machine elements by cladding method and then treat them by different thermo-chemical ways in order to obtain desired properties.
Czasopismo
Rocznik
Tom
Strony
71-74
Opis fizyczny
Bibliogr. 19 poz., rys., tab.
Twórcy
autor
autor
autor
- Technical University of Lodz, Institute of Materials Science & Engineering, Stefanowskiego 1/15, 90-924 Lodz, Poland, kemilk@p.lodz.pl
Bibliografia
- [1] Klimpel A.: Surfacing by welding and thermal spraying. WNT Warsaw 2000 (in polish).
- [2] Wojciechowski W.: Evaluation of pad welding ability of alloy steels. Monografia 219 Cracow (in polish).
- [3] Adamiec P., Dziubinski J.: Investigation and modelling of wear of pad welded machine parts. Przeglad Spawalnictwa. 1-2. 1996. pp. 3-6 (in polish).
- [4] Adamiec P., Dziubinski J.: Modelling of pad welded layers wear. Conf. Proc. "Regeneracja '95". Bydgoszcz. 1995. pp. 7-12 (in polish).
- [5] Has Z., Kaczmarek J.: Vacuum nitriding of pad welded layers from SW7M steel on C45 steel. Proc. of III International Conference "Obróbka Powierzchniowa". Częstochowa - Kule. 1996. pp. 91-95 (in polish).
- [6] Krasinski A., Klimek L., Kula P.: Investigation of resistance to scuffing on MULTIPLEX regenerative layers. Trybologia, 4, 2005, pp. 113 - 120 (in polish).
- [7] Krasinski A.: Machine parts and devices regeneration by surfacing by welding using low-alloy steel with further thermo-chemical treatment. PhD thesis. Technical University of Lodz. 2003 (in polish).
- [8] Kaczmarek J.: Hard layers deposition using surfacing by welding. PhD thesis. Technical University of Lodz. 1987 (in polish).
- [9] Krasinski A., Klimek L., Kaczmarek J.: Machine parts regeneration using MULTIPLEX method. Proc. of V National Conference "Materialografia 2005", Puck 2005, pp. 35 - 44 (in polish).
Typ dokumentu
Bibliografia
Identyfikatory
Identyfikator YADDA
bwmeta1.element.baztech-article-BPZ3-0032-0014