Synthesis of sequential control algorithms for pneumatic drives controlled by monostable valves

• Autorzy: Dworzak, Ł. , Mikulczyński, T.
• Języki publikacji: EN

Abstrakty

EN

Application of the Grafpol method [1] for synthesising sequential control algorithms for pneumatic drives controlled by monostable valves is presented. The developed principles simplify the MTS method of programming production processes in the scope of the memory realisation [2]. Thanks to this, time for synthesising the schematic equation can be significantly reduced in comparison to the network transformation method [3]. The designed schematic equation makes a ground for writing an application program of a PLC using any language defined in IEC 61131-3.

Słowa kluczowe

PL

mechanizacja procesów odlewniczych; automatyzacja odlewnictwa; metoda Grafpol; sterownik PLC

EN

mechanisation of foundry processes; automation of foundry processes; Grafpol method; PLC programming

• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2009
• Tom: Vol. 9, iss. 3
• Strony: 35-40
• Opis fizyczny: Bibliogr. 5 poz., rys.

Twórcy

autor

Dworzak, Ł.

autor

Mikulczyński, T.

• Basic Automation Laboratory, Wroclaw University of Technology, Łukasiewicza 5, 50-371 Wrocław, Poland,

Bibliografia

• [1] T. Mikulczyński, Automation of discrete manufacturing processes: methods of modelling discrete processes and PLC programming, WNT, Warsaw, 1997 (in Polish).
• [2] T. Mikulczyński, Z. Samsonowicz, K. Naplocha, Application of MTS method for PLC programming, VIII Conference PNEUMA'94, Wroclaw, 1994 (in Polish).
• [3] Tadeusz Mikulczyński, Automation of manufacturing processes, WNT, Warsaw, 2006 (in Polish).
• [4] Z. Banaszak, A. Drzazga, J. Kuś, Methods of interactive modelling and programming discrete processes, Publishing House of Technical University of Wroclaw University of Technology, Wroclaw, 1993 (in Polish).
• [5] J. Kasprzyk, Programming of industrial controllers, WNT, Warsaw, 2007 (in Polish).