Diffusion Bonding of Electroless Ni plated WC composite to Cu and AISI 316 Stainless Steel

• Autorzy: Yonetken, A. , Cakmakkaya, M. , Erol, A. , Talas, S.
• Języki publikacji: EN

Abstrakty

EN

In this study, a composite containing WC (Tungsten Carbide) and Ni was produced by two different processing routes. Electroless Ni coated WC powders were consolidated and sintered at 1200 °C. Diffusion bonding couples of WC(Ni)-electrolytic Cu, WC(Ni)-AISI 316 stainless steel and WC(Ni)-WC(Ni) were manufactured by using a preloaded compression system under Ar atmosphere. Diffusion bonding was carried out at varying bonding temperatures; 750 °C for (WC)Ni-Cu diffusion couple and 1200 °C for (WC)Ni-(WC)Ni and (WC)Ni-AISI 316 stainless steel diffusion couples. Standard metallographic techniques, Scanning Electron Microscopy and a shear test were employed to characterize the microstructure of bondline and mechanical properties of each diffusion couple, respectively.

Słowa kluczowe

EN

ceramic matrix composite; electroless plating; powder metallurgy; diffusion bonding

• Czasopismo: Materials Science Poland
• Rocznik: 2011
• Tom: Vol. 29, No. 1
• Strony: 15--21
• Opis fizyczny: Biblogr. 20 poz.,

Twórcy

autor

Yonetken, A.

autor

Cakmakkaya, M.

autor

Erol, A.

autor

Talas, S.

• A. Kocatepe University, Technical Education Faculty, 03200, Afyonkarahisar, Turkey

Bibliografia

• [1] HENRY J.R., Met. Finish, 97 (1999), 424.
• [2] WU P., DU H.M., CHEN X.L., LI Z.Q., BAI H.L., and JIANG E.Y., Wear, 257 (2004), 142.
• [3] FARROQ T., and DAVIES T.J., Int. J. Powder Metall.,27 (1991), 347.
• [4] STRAFFORD K.N., DATTA P.K., and O’DONNELL A.K., Mater. Design, 3 (1982), 608.
• [5] GUOZHI X., JINGXIAN Z., YIJUN L., KEYU W., XIANGYIN M., and PINGHUA L., Mater. Sci. Eng. A, 460 (2007), 461.
• [6] BALARAJU J.N., NARAYANAN T.S.N.S., and SESHADRI S.K., J. Appl. Electrochem., 33 (2003), 1241.
• [7] GIAMPAOLO A.R., ORDONEZ J.G., GUGLIEMACCI J.M., and LIRA J., Surf. Coat. Tech., 89 (1997), 127.
• [8] STROUMBOULI A., GYFTOU P., PAVLATOU E.A.,and SPYRELLIS N., Surf. Coat. Tech. 195 (2005), 325.
• [9] HAMID Z.A., El BADRY S.A., and AAL A.A., Surf.Coat. Tech. 201(2007), 5948.
• [10] FERNONDES C.M., SENOS A.M.R., CASTANIO J.M., and VIEIRA M.T., Mater. Sci. Forum, 514-516 (2006), 633.
• [11] LEMUS-RUIZ J., CEJA-CA´ RDENAS L., VERDUZCO J.A., and FLORES O., J. Mater. Sci., 43 (2008), 6296.
• [12] KURT A., UYGUR I., and ATES H., Mater. Sci. Forum, 546-549 (2007), 667.
• [13] LU S-P., KWON O-Y., Surf. Coat. Tech., 153 (2002), 40.
• [14] BUTRYMOWICZ D.B., MANNING J.R., and READ M.E., Diffusion Rate Data and Mass Transport Phenomena for Copper Systems, National Bureau of Standards,Washington, 1977.
• [15] Cu-Ni phase diagram, www.calphad.com.
• [16] Ni-Cr phase diagram, www.calphad.com.
• [17] BRIESECKA M., BOHNB M., LENGAUERA W., J.Alloy Comp., 489 (2010), 408.
• [18] Fe-Cr phase diagram, www.calphad.com.
• [19] YONETKEN A., PhD Thesis, Afyon Kocatepe University, Institute of Natural Sciences, 2008 (in Turkish).
• [20] MEYERS M.A., CHAWLA K.K., Cambridge University Press, Cambridge, 2009.