The effect of the T6 heat treatment on the surface structure and oxide layer of an Al-Si coat

• Autorzy: Kucharska, B. , Wróbel, A.
• Języki publikacji: EN

Abstrakty

EN

The paper presents investigation results for an Al-Si protective coat deposited from a liquid phase on the ferritic steel surface. A coat of chemical composition of Al - 6.5 wt.% Si was subjected to a T6 heat treatment at temperatures of 420 °C (solutionizing), and 80 °C and 120 °C (ageing). The effect of soaking on the structure of the Al-Si coat was determined by microscopic examination. By XRD examination, the effect of soaking on the phase composition of the coat, while by GXRD examination, the oxide layer composition were determined. It was found that relaxation of the coat surface layer (a decay of the technological cold work effects) occurred, and a highly dispersed oxide layer Al2SiO5 formed as a result of the heat treatment.

Słowa kluczowe

EN

Al-Si coatings; T6 treatment; oxides Al2O3/SiO2; XRD/GXRD measurements

• Czasopismo: Optica Applicata
• Rocznik: 2009
• Tom: Vol. 39, nr 4
• Strony: 889-896
• Opis fizyczny: bibliogr. 6 poz.,

Twórcy

autor

Kucharska, B.

autor

Wróbel, A.

• Institute of Materials Engineering, Częstochowa University of Technology, Armii Krajowej 19, 42-200 Częstochowa, Poland

Bibliografia

• [1] SWADŹBA L., MACIEJNY A., MENDALA B., MOSKAL G., JARCZYK G., Structure and resistance to oxidation of an Al–Si diffusion coating deposited by Arc-PVD on TiAlCrNb alloy, Surface and Coatings Technology 165(3), 2003, pp. 273–280.
• [2] BROSSARD J.M., HIERRO M.P., TRILLEROS J.A., CARPINTERO M.C., SÁNCHEZ L., BOLIVAR F.J., PÉREZ F.J., Heat treatment of codeposited aliminium–silicon coating on ferritic steels by CVD-FBR technology, Surface and Coatings Technology 201(12), 2007, pp. 5743–5750.
• [3] NOBUYOSHI KOGA, SHUTO YAMADA, Controlled rate thermal decomposition of synthetic bayerite under vacuum, Solid State Ionics 172(1–4), 2004, pp. 253–256.
• [4] WIERZCHOŃ T., Kierunki rozwoju inżynierii powierzchni, Problemy Eksploatacji, No. 3, 2004, pp. 251–265 (in Polish).
• [5] WRÓBEL A., KUCHARSKA B., NITKIEWICZ Z., Influence of heat treatment on the phase composition of Al-Si coat on X2CrTi12 high chromium steel, Inżynieria Materiałowa, No. 6(166), 2008, pp. 960–962.
• [6] BURAKOWSKI T., Rozwój inżynierii powierzchni a rozwój inżynierii eksploatacji, (Surface engineering development and maitenance engineeering development), Tribologia: tarcie, zużycie, smarowanie, No. 5, 1998, pp. 829–843 (in Polish).