Warianty tytułu
Języki publikacji
Abstrakty
Studies were performed on the production of highly dispersed green pigments, chromium(III) and nickel(II) silicates and oxides in emulsion systems. Appropriately selected parameters in which the process was conducted permitted to obtain pigments of optimum utility properties. The obtained pigments were subjected to a physicochemical analysis, i.a., their principal physicochemical properties were established, the including particle size, particle size distribution and the morphology of the particle surface.
Czasopismo
Rocznik
Tom
Strony
106-108
Opis fizyczny
Bibliogr. 5 poz., rys., tab.
Twórcy
autor
autor
autor
- Institute of Chemical Technology and Engineering, Poznan University of Technology, pl. M. Sklodowskiej-Curie 2, 60-965 Poznan, teofil.jesionowski@put.poznan.pl
Bibliografia
- (1) Klapiszewska B., Krysztafkiewicz A., Jesionowski T.: Highly dispersed green silicate and oxide pigments precipitated from post-galvanic refuse, Environ. Sci. Technol., 2003, 37, 4811.
- (2) Klapiszewska B., Krysztafkiewicz A., Jesionowski T.: Pigment Resin Technol., 2005, 34, 139.
- (3) Werner J.: Principles of painting and graphics (in Polish), PWN, Warszawa, 1985.
- (4) Krysztafkiewicz A.: Modified calcium silicates as active rubber fillers, J. Mater. Sci., 1987, 22, 478.
- (5) Krysztafkiewicz A.: Modified zinc silicate - an active rubber activator and filler, J. Mater. Sci., 1988, 23, 2407.
Typ dokumentu
Bibliografia
Identyfikatory
Identyfikator YADDA
bwmeta1.element.baztech-article-BPS2-0041-0038