Verification of properties of artificial ventilation device using ball screw drive transmission

• Autorzy: Jakuszin, K.

Warianty tytułu

PL

Badanie właściwości modułu urządzenia do wentylacji mechanicznej ze śrubowym przeniesieniem napędu

• Języki publikacji: EN

Abstrakty

EN

Author of the paper conducted a series of multiple test scenarios in order to verify properties of modified mechanical ventilation device with ball screw drive transmission. The apparatus was tested under various conditions including some popular respiratory system measurement methods, results showing its repeatability and stability of generated airflow patterns were presented. In conclusion, author indicated on direction of future work concerning tuning and corrections in drive setup.

Słowa kluczowe

PL

sztuczna wentylacja; opór układu oddechowego

EN

artificial ventilation; respiratory system resistance

• Czasopismo: Przegląd Elektrotechniczny
• Rocznik: 2012
• Tom: R. 88, nr 6
• Strony: 158-162
• Opis fizyczny: Bibliogr. 22 poz., tab., wykr.

Twórcy

autor

Jakuszin, K.

• Wrocław University of Technology, Chair of Electronic and Photonic Metrology,

Bibliografia

• [1] Rhoades R., Bell D. R., Medical physiology: principles for clinical medicine, Lippincott Williams & Wilkins, 3-rd edition, (2009), 329-390
• [2] Frey U., Merkus P.J.F.M., Paediatric Lung Function, European Respiratory Society, Monograph (2010), 47, 1-34
• [3] American Thoracic Society. Standards for the diagnosis and care of patients with chronic obstructive pulmonary disease, Am J Respir Crit Care Med, (1995), 152, 77–121
• [4] Celli B.R., MacNee W., Standards for the diagnosis and treatment of patients with COPD: a summary of the ATS/ERS position paper, European Respiratory Journal, (2004), 26, 932-946
• [5] Barbini P., Brighenti C., Cevenini G., Gnudi G. A dynamic model of the normal lung for studying expiratory flow limitation in mechanical ventilation, Ann. Biomed. Eng., (2005), 33, 518-530
• [6] Hess D., Kacmarek R.M., Essentials of mechanical ventilation, McGraw-Hill Professional, 2-nd edition, (2002), 1-136
• [7] Guerin C., Richard J., Measurement of respiratory system resistance during mechanical ventilation, Intensive Care Med, (2007) 33, 1046–1049
• [8] Mireles-Cabodevila E., Diaz-Guzman E., Heresi G.A., Chatburn R.L., Alternative modes of mechanical ventilation: A review for the hospitalist, Cleveland Clinic Journal Of Medicine, (2009), 76, 417-430
• [9] Grianti F., Montecchia F., Di Bari L., Baldassarri M., A Versatile Mechanical Ventilator (DIGIT) with High Flow Stability and a Programmable Inspiratory Phase Flow Pattern, IEEE Transactions On Biomedical Engineering, (1996), 43, 1062-1072
• [10] Stell I.M., Paul G., Lee K.C., Ponte J., Moxham J., Noninvasive Ventilator Triggering in Chronic Obstructive Pulmonary Disease A Test Lung Comparison, Am J Respir Crit Care Med, (2001), 164, 2092–2097
• [11] Polak A.G., Mroczka J., Nonlinear model for mechanical ventilation of human lungs, Computers in Biology and Medicine, (2006), 36, 4158
• [12] Neergaard J. von, Wirz K., Die Messung der Strömungswiderstände in den Atemwegen des Menschen, insbesondere bei Astma und Emphysem. Z. Klin. Med. (1927), 105, 51-82.
• [13] Jabłoński I., Mroczka J., Computer-aided Evaluation of a New Interrupter Algorithm in Respiratory Mechanics Measurement, Biocybernetics and Biomedical Engineering, (2006), 26, 33–47
• [14] Jabłoński I., Mroczka J., A forward model of the respiratory system during airflow interruption, Metrology and Measurement Systems,16, (2009), 2
• [15] Kaczka D.W., Ingenito E.P., Lutchen K.R., Technique to Determine Inspiratory Impedance during Mechanical Ventilation: Implications for Flow Limited Patients, Annals of Biomedical Engineering, (1999), 27, 340355.
• [16] Kaczka D.W., Lutchen K.R., Servo-Controlled Pneumatic Pressure Oscillator for Respiratory Impedance Measurements and High-Frequency Ventilation, Annals of Biomedical Engineering, (2004), 32, 596–608
• [17] Jabłoński I., Mroczka J., Frequency-domain identification of the respiratory system model during the interrupter experiment, Measurement, 42, (2009), 3, 390-398
• [18] Jabłoński I., Mroczka J.: A station for the respiratory mechanics measurement by occlusion techniques, Metrol. Meas. Syst., 14, (2007), 2, 229240.
• [19] Donoho D.L., De-Noising by Soft-Thresholding, IEEE Transactions on Information Theory, 41, (1995), 3, 613-627
• [20] Jabłoński I., Mroczka J., Frequency indexes of respiration during interrupter experiment, Metrology and Measurement Systems, 15, (2008), 2, 153-163
• [21] Jakuszkin K., Analysis of Properties of a Lung Mechanical Model During Artificial Ventilation Using Measurement Station, Metrol. Meas. Syst., 17 (2010), 3, 427-438
• [22] Mroczka J., Szczuczyński D., Inverse problems formulated in terms of first-kind Fredholm integral equations in indirect measurements, Metrol. Meas. Syst., 16, (2009), 3, 333-357