Warianty tytułu
Porównanie wydajności turbiny wiatrowej przy strategii polegającej na otrzymaniu maksimum mocy
Języki publikacji
Abstrakty
So far, much attention has been not received by the influence of the control modes on the wind turbine efficiency in maximum wind energy extraction, which is investigated based on variable speed wind turbines with doubly fed induction generator (DFIG) under vector control in stator flux orientation (SFO) in the paper. Prior art has tended to have an importance on investigating the principle and behaviors of control strategies in itself. As a result, two control modes, optimal rotor speed control mode and peak power control mode is investigated in detail. At first, Stator flux-orientated vector control for the rotor side converter of DFIG is reviewed, and in turn a comparison on two control modes is presented. Finally, a complete simulation model is developed to investigate how the operation of maximum wind energy extraction of the turbine below rated wind velocity, especially the wind turbine efficiency is affected by the two control methods. Simulation results are presented and compared under the two different control modes. Simulation results show that maximum wind energy extraction of the turbine and its efficiency is affected by different control modes.
W artykule porównano różne strategie zarządzania systemem elektrowni wiatrowych z podwójnie zasilanym generatorem indukcyjnym. Jedna ze strategii polega na kontroli optymalnej prędkości wirnika, druga na kontroli mocy szczytowej.
Czasopismo
Rocznik
Tom
Strony
157-163
Opis fizyczny
Bibliogr. 20 poz., schem., wykr.
Bibliografia
- [1] Rubira S.D., McCulloch M.D., Control Method Comparison of Doubly Fed Wind Generators Connected to the Grid by Asymmetric Transmission Lines, IEEE Trans. industry applications, 36(2000), No. 5, 986–991
- [2] Chowdhury B.H., Chellapilla S., Double-fed induction generator control for variable speed wind power generation, Electric Power System Research, 76(2006), No. 9-10, 786–800
- [3] Muller S., Deicke M., Doncker R.W.D., Doubly fed induction generator systems for wind turbines, IEEE Ind. Applicat. Mag., 8(2002), No 3, 26–33
- [4] Krzeminski Z., Sensorless multiscalar control of double fed machine for wind power generators, The IEEE Conference on POWER CONVERSION, April 2-5, 2002, Osaka, Janpan.
- [5] Chondrogiannis S., Barnes M., Stability of doubly-fed induction generator under stator voltage orientated vector control, IET Renew. Power Gener., 2(2008), No. 3, 170–180
- [6] Pena R., Clare J.C., Asher G.M., Doubly fed induction generation using back-to-back PWM converters and its application to variable speed wind-energy generation, IEE Proc.-Electr. Power Appl., 143(1996), No. 3, 231–241
- [7] Mihet-Popa L., Blaabjerg F., Boldea I., Wind turbine generator modeling and simulation where rotational speed is the controlled variable, IEEE Trans. Ind. Appl., 40(2004), No.1, 3–10
- [8] Calderaro V., Galdi V., Piccolo A., Siano P., A fuzzy controller for maximum energy extraction from variable speed wind power generation systems, Electric Power Systems Research, 78(2008), No. 6, 1109–1118
- [9] Wang Q., Chang L., An intelligent maximum power extraction algorithm for inverter based variable speed wind turbine systems, IEEE Trans. Power Electron., 19(2004), No. 5, 1242–1249
- [10] Datta R., Ranganathan V.T., A method of tracking the peak power points for a variable speed wind energy conversion system, IEEE Trans. Energy Convers., 18(2003), No. 1, 163–168
- [11] Xu L., Cartwright P., Direct active and reactive power control of DFIG for wind energy generation, IEEE Trans. Power Electron, 21(2006), No. 3, 750–758
- [12] Datta R., Ranganathan V.T., Direct power control of grid-connected wound rotor induction machine without rotor position sensors, IEEE Transactions on Power Electronics, 16(2001), No. 3, 390-399
- [13] Zhi D., Xu L., Direct power control of DFIG with constant switching frequency and improved transient performance, IEEE Trans. Power Electron., 22(2007), No. 1, 110–118
- [14] Li S., Haskew T.A., Muljadi E., Doubly fed induction generator maximum wind power extraction study through integrated steady-state and closed-loop control evaluation, Electric Power Components and Systems, 38(2010), No. 7, 767–785
- [15] Boyette A., Saadate S., Poure P., Direct and indirect control of a doubly fed induction generator wind turbine including a storage unit, The 32nd Annual IEEE Conference on INDUSTRIAL ELECTRONIC, November 7-10, 2006, Paris, France.
- [16] Yang S.Y., Zhang X., Zhang C.W., Chang L., Development of a variable-speed wind energy conversion system based on doubly-fed induction generator, The 22nd Annual IEEE Conference and Exposition on APPLIED POWER ELECTRONICS, February 25 -March 1, 2007, New York, USA.
- [17] Bianchi F.D., Battista H.D., Mantz R.J., Wind Turbine Control Systems: Principles, Modeling and Gain Scheduling Design, (London: Springer-Verlag, 2007, 10–16)
- [18] Vihriala H., Control of variable speed wind turbines, PhD dissertation, Dept. Elect. Eng., Tampere University of Technology, Findland, 2002
- [19] Iov F., Daniela A., Sorensen H.P., Wind Turbine Blockset in Matlab/Simulink: General Overview and Description of the Models, (Aalborg: UNI. PRINT Aalborg University, 2004, 26-28)
- [20] Li S., Haskew T.A., Characteristic study of vector-controlled doubly-fed induction generator in stator-flux-oriented frame, Electric Power Components and Systems, 36(2008), No. 9, 990–1015
Typ dokumentu
Bibliografia
Identyfikatory
Identyfikator YADDA
bwmeta1.element.baztech-article-BPOK-0037-0038