Warianty tytułu
Konferencja
Międzynarodowe Sympozjum: Metody oceny struktury oraz własności materiałów i wyrobów (XXIII ; 22-24.10.2008 ; Jarnołtówek, Polska)
Języki publikacji
Abstrakty
Personal computers including all its parts, CPU, monitor, keyboard and mouse belong to the group of "information technology and telecommunication equipment". At the present consumption rate personal computers are scrapped when they are fully or partly operating, but they do not satisfy their owners in their parameters. Operating parts, such as hard disks from personal computers, can be further used, e. g. as backup sources or by less demanding users. If it does not happen, electric and electronic waste is produced. According to the Waste Disposal Association it is necessary to support the use of waste in order to eliminate the amount of wastes determined for disposal and to preserve natural resources, particularly by reuse, recycling, composting and use of energy from wastes. Selected parts of waste hard disks from personal computers were evaluated metallographically. In addition, the used coatings were characterized and their thickness was determined. As it was found out, basic parts of hard disks are produced from basic metals, such as iron, aluminium and copper. The contents of the contribution should add to increasing knowledge and the possibilities of electrical waste recycling.
Słowa kluczowe
Rocznik
Tom
Strony
51-52
Opis fizyczny
Bibliogr. 4 poz.
Twórcy
Bibliografia
- [1] Official bulletin C 76, 11.3.1997, p. 1.
- [2] Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2002/96/ES on waste electrical and electronic equipment (WEEE) [online]. URL <http://eurex.europa.eu/smartapi/cgi/sga_doc?smartapi!celexapi!prod! CELEXnumdoc&numdoc=32002L0096& model=guichett&lg=cs>, [cit. 23.7.2008].
- [3] Functionality, interface and technology of hard disks. URL <http://www.svethardware.cz/art_doc-D35E78C6C3B894 FFC125727F005BE243.html>
- [4] HAJDŮCHOVÁ B.: Mobile phones as the source for material recycling. Bachelor thesis at the Faculty of Metallurgy and Material Engineering at VŠB -Technical University of Ostrava, at the department of non-ferrous metals, refinement and recycling, Ostrava, 2008. Diploma thesis consultant Ing. Burkovič R., CSc.
Typ dokumentu
Bibliografia
Identyfikatory
Identyfikator YADDA
bwmeta1.element.baztech-article-BPOB-0029-0023