Computer aided electrochemical shaping of curvilinear surfaces

• Autorzy: Sawicki, J. , Paczkowski, T.
• Języki publikacji: EN

Abstrakty

EN

Machining involves removing a surface layer from an object with the use of mechanical energy. It often happens that this process is very difficult or even impossible due to technical and economic problems ( big strength and tear resistance of the machined material). Therefore, new technological processes of removing the material from the machined object, have been developed. They involve, e.g. dissolution, melting or the material vaporization. These processes need energy of electric discharge, chemical reaction energy, and energy carried by a stream of particles the material destruction which occurs, then, are called the material dissolution (erosion). There are different classifications of dissolution machining The most popular one is electro discharge machining (EDM), electrochemical machining (ECM), stream-dissolution machining (i.e. electron-machining (EBM) and ion- machining (IBM). The purpose of this work is to present the problems connected with the computer aided electrochemical (ECM) as one of a few kinds of dissolution machining.

Słowa kluczowe

EN

ECM; computer simulation

• Czasopismo: Journal of Polish CIMAC
• Rocznik: 2012
• Tom: Vol. 7, no 3
• Strony: 261-267
• Opis fizyczny: Bibliogr. 14 poz., rys.

Twórcy

autor

Sawicki, J.

autor

Paczkowski, T.

• University of Technology and Life Sciences Faculty of Mechanical Engineering ul. Prof. Sylwestra Kaliskiego 7, 85-791 Bydgoszcz,

Bibliografia

• [1] Alkire. R., Bergh. T., Sani. R. L., Predicting electrode shape change with use of finite 266 element methods, J. Electrochem. Soc. 125. 1978, s. 1981-1988.
• [2] Dąbrowski L., Podstawy komputerowej symulacji kształtowania elektrochemicznego, Pr. Naukowe PW, Mechanika nr 154, Wydawnictwo Politechniki Warszawskiej, Warszawa, 1992.
• [3] Jain, V. K., Pandey. P. C., Tooling design for ECM-A finite element approach. Trans. ASME. J. Engng lndustry 103, 1981, s. 183-191.
• [4] Kozak J., Kształtowanie powierzchni obróbką elektrochemiczną bezstykową (ECM), Pr. Naukowe PW, Mechanika nr 41, Wydawnictwo Politechniki Warszawskiej, Warszawa, 1976
• [5] Kozak J., Mathematical Models for Computer Simulation of Electrochemical Machining Process, Journal of Materials Processing Technology, Vol. 76, 1998, N. 1-3.
• [6] Łubkowski K., Stany krytyczne w obróbce elektrochemicznej, Prace naukowe, Mechanika, z.163, Oficyna Wydawnicza PW, Warszawa, 1996.
• [7] McGeough, J.A., Principles of Electrochemical Machining, London: Chapman &Hall, 1974.
• [8] Paczkowski T., Sawicki J., Electrochemical machining of curvilinear surfaces, Journal of Machining Science and Technology, vol. 12 (1), Philadelfia 2008, s. 33-52.
• [9] Paczkowski T., Sawicki J., Wpływ koncentracji wodoru w elektrolicie na ewolucją kształtu przedmiotu obrabianego, wybrane zagadnienia obróbek skoncentrowaną wiązką energii, Praca zbiorowa pod red. Michała Styp-Rekowskiego, BTN, Bydgoszcz. 2003, s. 62-69.
• [10] Paczkowski T., Sawicki J., Zagadnienie odwrotne w modelowaniu obróbki Elektrochemicznej kształtowej, Zagadnienia Mechaniki Stosowanej, T. 1, UTP, 2007, s. 83-95.
• [11] Prentice, G. A., Tobias, C. W., Simu1ation of changing electrode profiles, J. Electrochem. Soc. 129(1), ,1982, s. 78-85.
• [12] Sautebin, R., Froidevaux. H., Landolt. D., Theoretical and experimental modeling of surface leveling in ECM under primary current distribution conditions, J. Electrochem. Soc. 127(5), 1980, s.1096-1100.
• [13] Wilson J.F., Practice and Theory of Electrochemical Machining, New York, Wiley, 1971.
• [14] Zhou. Y., Finite element analysis of elcctrochemical machining problems validity of elcctroneutrality assumption. and flow in solution erystal growth system, Ph.D. thesis. Department of Chemical Engineering and Materials Science, University of Minnesota. Minneapolis. MN. 1995.