Multi-goal optimization of a carry-mould

• Autorzy: Reggiani, B. , Cosmi, F.
• Języki publikacji: EN

Abstrakty

EN

A common engineering task is the optimization of components thai are pari of multi-body assemblies, in which it is difficult to extrapolate and define the boundary conditions to be applied for the component optimization. This work presents a procedure for multi-goal optimization of components that are integrated in multipart engineering systems. The efficiency of the procedure is illustrated by means of a test case, a carry-mould that is part of a multi-component blowing machinery. Target goals of the optimization process are the minimization of moment of inertia and of global mass and the maximum allowable displacement in a number of controll points.

Słowa kluczowe

PL

modelowanie; machine; model

EN

carry-mould; multi-goal optimization; design; blow-machinery assembly; modelling

• Czasopismo: Engineering Transactions
• Rocznik: 2009
• Tom: Vol. 57, iss. 2
• Strony: 105-112
• Opis fizyczny: Bibliogr. 7 poz., rys., wykr.

Twórcy

autor

Reggiani, B.

autor

Cosmi, F.

• University of Bologna Department of Mechanical Engineering, Bologna, Italy

Bibliografia

• 1. F, COSMI, A finite element method comparison of wear in two metal-on-metal total hip prostheses. In the Proceedings of the I MECH E Part H Journal of Engineering in Medicine. 220. 87] 79, 2
• 2. www.esteco.com
• 3. O. KOKSOY, Robust design using Pareto-type optimization: A genetic algorithm with arithmetic crossover, Computer & Industrial Engineering, 55. 208-218, 2008.
• 1. I, COSMI, Otttmizzazione multiobiettivo di cambi di velocita…[in Italian], In Proceedings of the XXVIII MAS Conference, Vicenza, Italy, 445-58, 1999.
• 5. C. POLONI, Multi-objective robust design optimization of an engine crankshaft. III European Conference on Computation Mechanics Solids, Structures and Coupled Problems in Engineering, Lisbon, Portugal, 2006.
• 6. UNIEN 1563, Founding- Spheroidal graphite cast irons [in Talian], 2004.
• 7. R.C. .Irvin Fundamental of Machint Component Design. .John Wiley .V Sons Inc..2005.