An analysing of heat treatment process planning

• Autorzy: Smoljan, B.
• Konferencja: 12th International Scientific Conference CAM3S'2006, 27-30th November 2006, Gliwice-Zakopane
• Języki publikacji: EN

Abstrakty

EN

Purpose: Process planning of heat treatment has been investigated. The established approach of heat treating process planning is suitable for effective integration of heat treatment in computer added manufacturing. Design/methodology/approach: Process plan of heat treating process has been established based on fundamental process planning principals. The heat treatment was treated in the same as other manufacture processes. Findings: The general approach for process planning of heat treatment processes has been established. Heat treatment processes have to be designed into operations and sub-operations with the same principles that are also valid for other manufacturing processes. Research limitations/implications: The further research should be focused on development of methods for the better application of achieved results. Practical implications: This way of heat treatment process planning is more appropriate for integral trends of manufacturing, i.e., with the trend of introducing the modern systems in all parts of industrial manufacturing. Originality/value: The global approach of process planning of heat treatment processes was established and better unification with other manufacturing processes was achieved.

Słowa kluczowe

PL

planowanie produkcji; sterowanie produkcją; obróbka cieplna; oziębianie; odpuszczanie; hartowanie

EN

production planning; production control; heat treatment; quenching; tempering; case hardening

• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2007
• Tom: Vol. 20, nr 1-2
• Strony: 563-566
• Opis fizyczny: Bibliogr. 14 poz., rys., tab.

Twórcy

autor

Smoljan, B.

• Department of Materials Science and Engineering, Faculty of Engineering, University of Rijeka, Vukovarska 58, HR-51000 Rijeka, Croatia,

Bibliografia

• [1] H.K. Tönshoff, M.A. Rotzoll, Application of evolutionary algorithms for planning and improving manufacturing systems, CIRP International Seminar on Intelligent Computation in Manufacturing Engineering, ICME'98, 1-3 (1998), Capri, Italy, 97-104.
• [2] A. Molina, C.A. Rodriguez, H. Ahuett, J.A. Cortés, M. Ramirez, G. Jimenéz, S. Martinez, Next-generation manufacturing systems: key research issues in developing and integrating reconfigurable and intelligent machines, International Journal of Computer Integrated Manufacturing, 18 (2005) 525-536.
• [3] L.A. Dobrzański, Fundamentals of materials science and Physical Metallurgy, Engineering Materials with Fundamentals of Materials Design, WNT, Warsaw, 2002 (in Polish).
• [4] B. Smoljan, Process planning of heat treating processes, International Scientific Conference microCAD 2004, Miskolc, Hungary, 103-108.
• [5] R. Babilas, B. Krupińska, D. Szewieczek, The optimisation of a technological process forms a competitive position of the factory, Journal of Achievements in Materials and Manufacturing Engineering, Vol.16, Issue 1-2 (2006) 177-183.
• [6] K.C. Yung, An integrated model for manufacturing process improvement, Journal of Materials Processing Technology 61 (1996) 39-43.
• [7] A. Dobrzańska-Danikiewicz, D. Krenczyk, The selection of the production route in the assembly system, Journal of achievements in Materials and Manufacturing Engineering, Vol. 17, Issue 1-2 (2006) 417-420.
• [8] C. O'Donoghue, J. Prendergast, Benefits of computerised management system implementation in manufacturing plants, Proceedings of the International Conference on Advances in Materials and Processing Technologies, AMPT 2003, Dublin, 2003, 653-656.
• [9] M. Curtis, Process Planning, John Wiley and Sons, 1988.
• [10] G. Müller, Technologische Fertigung Sorbereitung. VEB Verlag Technik, Berlin, 1975.
• [11] B. Smoljan, J. Lubetić, An Investigation of Process Planning of Heat Treatment, Proceedings of the 8th Seminar of the International Federation for Heat Treatment and Surface Engineering, Dubrovnik-Cavtat, 2001, 127-132.
• [12] G. Kraus, Principles of Heat Treatment of Steel, ASM Metals Park, Ohio, 1980.
• [13] ASM Handbook Heat Treating, ASM Metals Park, Ohio 1991.
• [14] R. Haefer, Oberflachen Dunschit Technologie, Springer Verlag, Berlin, 1987.