The assessment and design of waste heat recovery technology from the sand drier process in the foundry

• Autorzy: Zalesak, M. , Bilenny, Z.
• Języki publikacji: EN

Abstrakty

EN

The work deals with a possible solution on heat recovery related to the sanddrier SCH 5 in a foundry. The heat recovery applied on air entering the heating chamber is designed in this variant. The work consists of analysis of drying process including balance calculations, design with relevant calculations, including possible power savings, the way of control of the relevant foundry sand drier, used at present and possibility of visualization of the control system by means of Control Web programme. Further, possible technical solution and its economic evaluation are stated in the work.

Słowa kluczowe

PL

suszenie; wymiennik ciepła; sieć sterująca

EN

drying; dryer; heat exchanger; control web

• Czasopismo: Archives of Materials Science
• Rocznik: 2007
• Tom: Vol. 28, nr 1-4
• Strony: 176-180
• Opis fizyczny: Bibliogr. 6 poz., rys.

Twórcy

autor

Zalesak, M.

autor

Bilenny, Z.

• Department of Automation and Control Engineering , Faculty of Applied Informatics, Tomas Bata University in Zlín Nad Stranemi 4511, 760 05 Zlin, Czech Republic,

Bibliografia

• [1] M. Zálešák, Final evaluation of laboratory of integrated systems in buildings, UTB, Zlin, 2007.
• [2] Z. Bilenný, The proposal of waste heat usage from the sand drier in the Slévárna ZPSTAJMAC a.s. Zlín, including the implementation of modern methods of control and monitoring, First Edition, UTB, Zlín, 2007.
• [3] J. Šesták, R. Žitný, Tepelné pochody II, ČVUT Praha, 2006.
• [4] W.R. Rohsenow, J.P. Hartnett, Y.I. Cho, Handbook of heat transfer, Third Edition, MacGraw-Hill, 1998.
• [5] VDI – Warmeatlas, Springer-Verlag, 2006.
• [6] Web-site: http://www.controlweb.cz/